Table of Contents
The Audi RS6 is a high-performance vehicle that demands equally high-performance braking systems. Upgrading to a Brembo GT Brake Kit can significantly enhance your stopping power, providing better control and safety during high-speed driving. This article will guide you through the process of installing the Brembo GT Brake Kit on your Audi RS6.
Why Upgrade Your Brakes?
Upgrading your brakes is essential for several reasons:
- Improved Stopping Power: High-performance brake kits provide better braking efficiency.
- Heat Dissipation: Upgraded brakes can handle higher temperatures, reducing fade.
- Enhanced Safety: Better brakes mean improved safety for both driver and passengers.
- Performance Optimization: Enhances overall driving experience, especially on the track.
What is the Brembo GT Brake Kit?
The Brembo GT Brake Kit is a premium braking system designed for high-performance vehicles. It includes:
- High-Performance Brake Calipers: Lightweight and durable calipers that provide excellent clamping force.
- Slotted and Drilled Rotors: Designed to improve heat dissipation and reduce brake fade.
- Performance Brake Pads: Engineered for optimal grip and reduced wear.
- Stainless Steel Brake Lines: Enhanced durability and improved pedal feel.
Tools and Materials Needed
Before starting the installation, ensure you have the following tools and materials:
- Jack and jack stands
- Socket set
- Torque wrench
- Brake cleaner
- New Brembo GT Brake Kit
- Safety glasses and gloves
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by parking your Audi RS6 on a flat surface. Engage the parking brake and wear safety glasses and gloves. Loosen the lug nuts on the wheels, but do not remove them yet.
Step 2: Lift the Vehicle
Using a jack, lift the front of the vehicle and secure it with jack stands. Repeat this for the rear if you are upgrading all four brakes.
Step 3: Remove the Wheels
Now, remove the lug nuts completely and take off the wheels to access the brake components.
Step 4: Remove the Old Brake Components
Remove the caliper by unscrewing the bolts holding it in place. Carefully slide the caliper off the rotor and hang it securely to avoid damaging the brake line. Next, remove the old brake pads and rotor.
Step 5: Install the New Brembo Rotors
Place the new Brembo rotor onto the hub, ensuring it is seated correctly. Secure it with the factory bolts and torque to the manufacturer specifications.
Step 6: Install the New Brake Pads
Slide the new brake pads into the caliper bracket, ensuring they are correctly positioned and seated. Apply brake grease to the backing of the pads to reduce noise and improve performance.
Step 7: Attach the New Calipers
Position the new Brembo caliper over the rotor and pads. Secure it using the provided bolts and torque them to the manufacturer’s specifications.
Step 8: Repeat for Other Wheels
Repeat steps 4 through 7 for the other wheels, ensuring each brake component is installed correctly.
Step 9: Reinstall the Wheels
Once all brake components are installed, put the wheels back on and hand-tighten the lug nuts.
Step 10: Lower the Vehicle
Carefully lower the vehicle back to the ground and torque the lug nuts to the specified settings.
Step 11: Test the Brakes
Before driving, pump the brake pedal a few times to ensure the pads are seated correctly. Check for any leaks and ensure everything is secure.
Conclusion
Upgrading to the Brembo GT Brake Kit is a significant step in enhancing your Audi RS6’s performance. With improved stopping power and safety, this upgrade is well worth the investment for any RS6 owner. Enjoy the enhanced driving experience that comes with superior braking performance!