The Nissan S13 240SX remains one of the most iconic platforms in the drift and street-performance scene. With the factory KA24DE engine capable of supporting 350 wheel horsepower (WHP) with the right turbo setup and fuel system, building a car that can put that power down effectively requires a properly chosen suspension. Stock struts and springs will leave you struggling with excessive body roll, poor weight transfer, and inconsistent tire contact. A high-quality coilover kit is not just a handling upgrade—it’s a necessity for controlling the added power, managing chassis dynamics, and giving the driver confidence whether on a track day, autocross course, or back road.

Why Coilovers Are Critical for a 350 WHP S13 240SX

Every increase in horsepower amplifies the demands placed on the suspension. At 350 WHP, the S13’s original suspension geometry and soft damping become liabilities. Coilovers provide three essential advantages for this power level:

  • Adjustable ride height – Lowering the center of gravity reduces weight transfer during acceleration, braking, and cornering, keeping the tires planted.
  • Independent damping control – High-quality coilovers allow you to tune compression and rebound to match tire compound, driving style, and track conditions, preventing the chassis from becoming unsettled under power.
  • Increased spring rates – Factory springs (typically around 150 lb/in front and 130 lb/in rear) are far too soft for 350 WHP. Aftermarket coilovers offer spring rates from 6k/5k (336/280 lb/in) up to 12k/10k (672/560 lb/in) or more, preventing the car from squirming under acceleration and cornering.

Without these features, the car will suffer from excessive squat on throttle, dive under braking, and unpredictable oversteer—all of which are dangerous at higher power levels.

Key Factors to Consider When Selecting Coilovers

Spring Rates

Spring rate is the most impactful factor in how a coilover feels and performs. For a street-driven 350 WHP S13 that sees occasional track use, a spring rate around 8k front and 6k rear (448/336 lb/in) is a common starting point. For a dedicated track or drift car, rates of 10k/8k or higher help control body motion and allow quicker transitions. Be aware that stiffer springs require appropriately matched damping to avoid a bouncy or harsh ride.

Damping Adjustment

Most coilovers in the $800–$2,000 range offer 24 to 32 clicks of combined compression and rebound adjustment (often labeled as single-adjustable). Some premium models separate compression and rebound (double-adjustable), giving finer control. For 350 WHP, at least 24-click single-adjustable damping is recommended to dial out understeer or oversteer caused by weight transfer.

Ride Height Adjustability

Look for coilovers with a threaded lower bracket (perch) and a separate spring preload adjuster. This design lets you lower the car significantly (1–3 inches) without compromising suspension travel. Avoid kits that only adjust via spring preload, as they can top out the damper and reduce droop travel.

Camber and Caster Adjustable Top Mounts

Pillowball (camber) top mounts are included or optional on many S13 coilovers. These plates allow for fine-tuning camber angle (typically -3° to -5°), which improves cornering grip and tire wear under power. For a 350 WHP car, you’ll want at least front camber plates to manage increased steering forces.

Build Quality and Rebuildability

Coilovers that can be rebuilt (e.g., with replacement seals and oil) offer long-term value. Brands like BC Racing, Fortune Auto, and Tein provide rebuild services. Cheap coilovers without rebuildable dampers will need to be replaced entirely when they wear out.

Detailed Reviews of the Best Coilover Kits for 350 WHP

1. BC Racing BR Series

BC Racing’s BR series has become the de facto standard for budget-conscious S13 owners who need reliable performance. The BR coilovers are single-adjustable with 30 clicks of damping range, using a mono-tube design with a remote reservoir option (the ER series) for extra oil capacity. Spring rates are available from 5k to 14k, allowing you to tailor the setup to your power level and use case.

For 350 WHP, a 8k front / 6k rear spring set is a proven combination. The aluminum pillowball top mounts (front) and rubber bushings (rear) reduce noise while maintaining rigidity. The BR series also includes adjustable rear shock bodies for shorter dampers, which helps maintain suspension travel when lowered.

Pros: Excellent value; wide spring rate selection; rebuildable; strong customer support

Cons: Not as plush as street-focused brands; may require frequent re-greasing of pillowball joints in harsh climates

Price Range: $1,000 – $1,300

Check the latest pricing at the BC Racing official site.

2. Tein Flex Z

Tein’s Flex Z coilovers are engineered for street-driving comfort while still offering enough adjustability for track days. They use a twin-tube design with internal nitrogen and oil separation (called the Z.T. coating) to reduce friction and improve ride quality. The damper has 16 clicks of adjustment—less than some competitors, but the range is well-calibrated for everyday use.

Spring rates are preset at 7k front and 5k rear (392/280 lb/in), which is a bit soft for a 350 WHP track car but ideal for a mixed-use vehicle. The height adjustment is independent of preload, and the front pillowball top mounts provide camber adjustability. Tein also offers optional EDFC (Electronic Damping Force Controller) for on-the-fly damping changes, though that adds cost.

Pros: Smooth ride quality; easy to install; good for daily driving; EDFC compatible

Cons: Limited damping range; softer springs may be overwhelmed on track; not rebuildable (sealed cartridge)

Price Range: $1,200 – $1,500

See the full specs at the Tein Flex Z page.

3. Fortune Auto 510 Series

Fortune Auto’s 510 series is a step up in quality and customization. These coilovers are assembled in the USA using Swift springs (known for their durability and minimal sag) and custom valved to your spring rates and driving style. The 510 series offers 30 clicks of damping adjustment and a true threaded shock body for maximum drop without losing travel.

For a 350 WHP build, Fortune Auto recommends 8k/6k or 10k/8k springs depending on whether the car is street or track-focused. The aluminum rear shock bodies reduce unsprung weight, and the front pillowball mounts come standard. What sets Fortune Auto apart is the option to specify your desired spring rates and even custom damping valving at no extra cost during initial purchase.

Pros: Fully customizable; Swift springs included; excellent build quality; rebuildable

Cons: Higher price point; wait time for custom orders; limited distribution compared to BC Racing

Price Range: $1,500 – $2,000

Learn more about the 510 series at Fortune Auto’s website.

4. Stance GR+ Series

Stance coilovers have gained recognition in the drift community for their robust construction and consistent damping performance. The GR+ series features 32 clicks of adjustment, monotube construction, and a remote reservoir option (GR+ Pro) for oil and gas separation. Spring rates are offered in a wide range, but 7k/6k is common for street-driven cars and 9k/8k for stiffer setups.

Stance includes front pillowball mounts with spherical bearings and rear camber adjustment via eccentric bolts. The zinc-coated bodies resist corrosion, and the dampers are fully rebuildable. For a 350 WHP S13 used for street and occasional track days, the GR+ series provides an ideal balance of feel and comfort.

Pros: Proven in competitive drifting; large adjustment range; top-quality hardware

Cons: Slightly heavier than some competitors; ride can be harsh on rough roads if damping is not dialed in; price has increased in recent years

Price Range: $1,000 – $1,400

Visit the official Stance GR+ page for details.

5. Godspeed MonoSS

If you’re on a tight budget but still need coilovers to handle 350 WHP, Godspeed’s MonoSS series offers a surprisingly capable entry point. These coilovers use a monotube design with 30 clicks of damping, high-pressure nitrogen gas, and pillowball top mounts front and rear. Spring rates are fixed at 8k/6k, which is appropriate for the power level.

While the MonoSS lacks some of the finer tuning adjustments and long-term durability of pricier brands, they perform well for the price. They are a popular choice for drift beginners or for those who plan to upgrade to a higher-end kit later. Note that the damping range is limited, and the ride quality is firm even on the softest setting.

Pros: Very affordable; functional balance of performance and price; includes top mounts

Cons: Not rebuildable; limited spring rate options; some reports of premature wear on high-mileage cars

Price Range: $800 – $1,000

Check availability at the Godspeed Project store.

Additional Coilover Options for the S13

Beyond the five brands covered, a few other options deserve mention for the 350 WHP build:

  • KW Variant 3 – High-end German engineering with independent rebound and compression adjustment. Prices start around $2,500. These are overkill for many but offer the best street compliance.
  • Ohlins Road & Track – Dual-tube, internal reservoir design with 20 clicks. Bump-and-rebound adjustments are combined. Expect to pay $2,800+. Ideal for canyon carving and light track use.
  • Megan Racing EZ II – A budget alternative similar to Godspeed, around $750–$900. 24 clicks of damping. Acceptable for low-budget builds but not recommended for sustained track abuse at 350 WHP.

Installation and Setup Tips for 350 WHP

Once you’ve chosen a coilover kit, proper installation and setup are crucial to unlocking its potential for your power level.

Ride Height

Set ride height based on your intended use. For street driving with 350 WHP, lowering the car 1.5–2.0 inches from stock is typical. Avoid going too low (over 3 inches) as it can lead to bump steer, bottoming out, and excessive camber that hurts straight-line traction. Use a tape measure from the center of the wheel to the fender lip to match left/right sides.

Damping Adjustment

Start with the manufacturer’s recommended “soft” setting (usually 12–18 clicks from full stiff). Drive the car on a familiar road and adjust harder to reduce body roll or softer to improve rear grip. For a 350 WHP car, the rear damping often needs to be softer than the front to allow the tires to follow the road under power. Fine-tune at a safe location or track day.

Corner Balance

If possible, have the car corner-balanced on scales. A 350 WHP S13 should have a 50/50 weight distribution after driver weight is added. Corner balancing adjusts ride height per corner to equalize diagonal weight transfer, improving predictable handling. This service is offered at most performance shops and costs around $200–$300.

Alignment

After setting ride height, get a professional alignment. A typical aggressive street alignment for 350 WHP is:

  • Front camber: -2.5° to -3.0°
  • Rear camber: -1.5° to -2.0°
  • Toe: 0° to 1/16” toe-in front, 1/8” toe-in rear
  • Caster: As much positive caster as possible (5°–7°) for steering feel

Final Thoughts

Building a 350 WHP S13 240SX is a rewarding project, but the suspension must keep pace with the power. The coilover kits reviewed here—BC Racing BR, Tein Flex Z, Fortune Auto 510, Stance GR+, and Godspeed MonoSS—each serve different priorities. For the best balance of cost, performance, and adjustability, the BC Racing BR series is the all-around champion. If ride quality is top priority, the Tein Flex Z excels. For full customization and top-tier components, Fortune Auto 510 is worth the premium.

No matter which kit you choose, invest time in setup and consider professional corner balancing. With the right coilovers properly tuned, your S13 will handle 350 WHP with confidence, giving you the control and feedback you need to enjoy every mile.