Table of Contents
Installing a performance exhaust on your Audi RS6 can significantly enhance its sound and performance. Not only can you enjoy a more aggressive exhaust note, but you can also save money by opting for a DIY installation. This guide will walk you through the steps to install a performance exhaust system on your Audi RS6, helping you save up to $1,200 compared to professional installation.
Benefits of a Performance Exhaust
Upgrading to a performance exhaust system offers several advantages:
- Improved Sound: A performance exhaust enhances the engine’s sound, giving your RS6 a more aggressive tone.
- Increased Performance: A less restrictive exhaust can improve power and torque.
- Weight Reduction: Many aftermarket exhausts are lighter than stock systems, reducing overall vehicle weight.
- Enhanced Aesthetics: A performance exhaust can improve the look of your vehicle with polished tips and a sportier design.
Tools and Materials Needed
Before starting your DIY installation, gather the following tools and materials:
- Performance exhaust system designed for Audi RS6
- Socket set and ratchet
- Wrenches (various sizes)
- Jack and jack stands
- Safety goggles
- Gloves
- Lubricant or penetrating oil
- Exhaust clamps (if not included with the system)
Preparation Steps
Follow these preparation steps to ensure a smooth installation process:
- Park on a Level Surface: Ensure your Audi RS6 is parked on a flat, stable surface.
- Safety First: Wear safety goggles and gloves to protect yourself during the installation.
- Lift the Vehicle: Use a jack to lift the car and secure it with jack stands for safety.
- Apply Lubricant: Spray lubricant on the exhaust bolts to make removal easier.
Removing the Stock Exhaust
To install your new performance exhaust, you first need to remove the stock exhaust system. Follow these steps:
- Locate the Exhaust Bolts: Find the bolts connecting the stock exhaust to the exhaust manifold and the catalytic converter.
- Remove Bolts: Use the socket set to carefully remove these bolts. Keep them in a safe place for later use.
- Disconnect the Exhaust: Gently pull the stock exhaust away from the exhaust hangers and remove it from the vehicle.
- Inspect the Area: Check for any damage or rust before installing the new exhaust.
Installing the Performance Exhaust
Now that the stock exhaust is removed, it’s time to install the performance exhaust:
- Position the New Exhaust: Align the performance exhaust with the exhaust hangers and the exhaust manifold.
- Secure the Exhaust: Use the original bolts or new bolts provided with the performance exhaust to secure it in place.
- Check Alignment: Ensure the exhaust tips are centered and aligned properly with the rear of the vehicle.
- Install Clamps: If your exhaust system requires clamps, make sure they are tightened securely.
Final Checks and Testing
After installation, perform the following checks:
- Inspect Connections: Double-check all connections and bolts to ensure everything is secure.
- Lower the Vehicle: Carefully remove the jack stands and lower the vehicle back to the ground.
- Start the Engine: Start your Audi RS6 and listen for any unusual sounds or leaks.
- Test Drive: Take your vehicle for a test drive to experience the enhanced sound and performance.
Conclusion
Installing a performance exhaust on your Audi RS6 is a rewarding DIY project that can enhance your vehicle’s sound and performance while saving you money. By following this guide, you can confidently complete the installation and enjoy the benefits of your new exhaust system.