Table of Contents
Installing a Dinan S55 Cold Air Intake can significantly enhance the performance of your BMW. This guide will walk you through the step-by-step process of installation, along with a cost breakdown to help you budget for this upgrade.
What You Will Need
- Dinan S55 Cold Air Intake Kit
- Socket set
- Screwdriver set
- Torque wrench
- Shop towels
- Protective gloves
- Safety glasses
Preparation
Before starting the installation, ensure you have all the necessary tools and components. It’s also advisable to work in a well-ventilated area and wear appropriate safety gear.
Step 1: Disconnect the Battery
To begin, disconnect the negative terminal of the battery. This prevents any electrical shorts during installation.
Step 2: Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift off the cover and set it aside.
Step 3: Remove the Factory Air Intake
Next, disconnect the air intake duct from the throttle body. Remove any clamps and screws holding the factory air intake in place. Gently pull the intake out of the engine bay.
Step 4: Install the Dinan Cold Air Intake
Take the Dinan cold air intake and position it in the engine bay. Align it with the throttle body and secure it using the provided clamps and screws. Ensure everything is tightened properly.
Step 5: Reconnect the Air Intake Duct
Reconnect the air intake duct to the throttle body. Make sure the connection is snug and secure any clamps that were removed earlier.
Step 6: Reinstall the Engine Cover
Place the engine cover back onto the engine bay and secure it with the bolts you removed earlier. Ensure it is fitted correctly and securely.
Step 7: Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure it is tightened properly to avoid any electrical issues.
Post-Installation Checks
After installation, it’s essential to perform a few checks to ensure everything is functioning correctly.
- Check for any loose connections or clamps.
- Start the engine and listen for any unusual noises.
- Monitor engine performance during the first few drives.
Cost Breakdown
Understanding the costs involved in the installation of a Dinan S55 Cold Air Intake is crucial for budgeting.
- Dinan S55 Cold Air Intake Kit: $400 – $600
- Tools (if not already owned): $100 – $200
- Labor (if using a mechanic): $100 – $200
Overall, expect to spend between $600 and $1000 depending on whether you choose to do it yourself or hire a professional.
Conclusion
Installing a Dinan S55 Cold Air Intake can be a rewarding project that enhances your BMW’s performance. With the right tools and careful following of the steps outlined in this guide, you can achieve a successful installation.