Table of Contents
Installing a Nismo intake on your Nissan 370Z can significantly enhance performance, potentially adding up to 15 horsepower. This step-by-step guide will walk you through the installation process, ensuring you get the most out of your vehicle.
Tools and Materials Needed
- Nismo intake kit
- Socket set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Rubber gloves
- Shop towels
Before starting, ensure you have all the necessary tools and materials. This will make the installation process smoother and more efficient.
Preparation
Begin by preparing your workspace. Make sure you have ample room to work around your Nissan 370Z. It’s also advisable to wear rubber gloves to keep your hands clean.
Step-by-Step Installation
Step 1: Remove the Engine Cover
Start by removing the engine cover. Use a socket set to unscrew the bolts holding the cover in place. Carefully lift it off and set it aside.
Step 2: Disconnect the Battery
For safety, disconnect the negative terminal of the battery. This prevents any electrical issues during the installation.
Step 3: Remove the Stock Intake System
Next, you need to remove the stock intake system. Start by loosening the clamps on the intake tubes using a flathead screwdriver. Carefully detach the tubes from the throttle body and airbox.
Once the tubes are detached, remove the air filter and the airbox. Ensure that you keep all the screws and clamps for reinstallation.
Step 4: Install the Nismo Intake
Now, it’s time to install the Nismo intake. Begin by placing the new air filter into the designated spot. Make sure it fits snugly.
Next, attach the intake tubes to the throttle body. Secure them using the clamps you removed earlier. Ensure everything is tightly fastened to avoid any air leaks.
Step 5: Reconnect the Battery
Once the intake is securely installed, reconnect the negative terminal of the battery. Ensure that the connection is tight and secure.
Step 6: Replace the Engine Cover
Finally, replace the engine cover. Align it properly and use the socket set to tighten the bolts. Make sure everything is securely fastened.
Testing Your Installation
After completing the installation, it’s crucial to test your Nissan 370Z. Start the engine and listen for any unusual sounds. Take the car for a test drive to feel the performance difference.
Conclusion
Installing a Nismo intake on your Nissan 370Z is a straightforward process that can lead to significant performance gains. By following this step-by-step guide, you can enhance your driving experience and enjoy the added horsepower.