Table of Contents
If you’re looking to enhance your driving experience with quicker shifts, installing a Cobb Short Throw Shifter is a great modification. This guide will walk you through the installation process in just 30 minutes and for under $200.
What You Need
Before you begin, gather the following tools and materials:
- Cobb Short Throw Shifter Kit
- Socket set
- Ratchet
- Torque wrench
- Flathead screwdriver
- Phillips screwdriver
- Safety glasses
Preparation Steps
Before you start the installation, ensure your vehicle is parked on a flat surface and the engine is off. Always wear safety glasses to protect your eyes.
Step 1: Remove the Shift Knob
To begin, twist off the shift knob by turning it counterclockwise. If it’s stuck, use a flathead screwdriver to gently pry it off.
Step 2: Remove the Center Console
Next, remove the screws securing the center console. Use a Phillips screwdriver to take out any screws located in the cup holders and under the armrest. Carefully lift the console to avoid damaging any clips.
Installing the Cobb Short Throw Shifter
With the center console removed, you can now access the shifter assembly.
Step 3: Disconnect the Shifter Linkage
Locate the shifter linkage and disconnect it by removing the retaining clip. This may require a flathead screwdriver to pry the clip off. Make sure to keep the clip in a safe place for reinstallation.
Step 4: Remove the Old Shifter
Next, remove the bolts securing the old shifter to the transmission. Use your socket set and ratchet to take out these bolts. Once removed, lift the shifter out of the assembly.
Step 5: Install the Cobb Short Throw Shifter
Take the Cobb Short Throw Shifter and position it in the shifter assembly. Align it properly and secure it with the bolts you removed earlier. Use a torque wrench to ensure the bolts are tightened to the manufacturer’s specifications.
Step 6: Reconnect the Shifter Linkage
Reconnect the shifter linkage by sliding it back onto the shifter and securing it with the retaining clip. Make sure it is firmly in place to avoid any shifting issues.
Reassembling the Center Console
With the new shifter installed, it’s time to put everything back together.
Step 7: Replace the Center Console
Carefully position the center console back into place. Make sure all clips are aligned and reinsert the screws you removed earlier. Tighten them securely, but be careful not to over-tighten and damage the plastic.
Step 8: Reattach the Shift Knob
Finally, twist the shift knob back onto the new shifter. Ensure it is securely fastened by turning it clockwise until it feels snug.
Final Checks
Before taking your vehicle for a test drive, double-check all connections and ensure everything is secure. Start the engine and shift through the gears to ensure smooth operation.
Conclusion
Installing a Cobb Short Throw Shifter can greatly improve your driving experience by providing quicker shifts and a sportier feel. With this guide, you can complete the installation in just 30 minutes and for under $200. Enjoy your enhanced driving experience!