Table of Contents
Installing a Borla S-type exhaust system can significantly enhance the performance and sound of your vehicle. To ensure a successful installation, follow these tips for achieving the perfect fit and optimal sound.
Preparation Before Installation
Before you begin the installation process, it’s crucial to prepare adequately. This preparation will make the installation smoother and more efficient.
- Gather all necessary tools: socket set, wrenches, torque wrench, and a saw if needed.
- Read the installation manual provided by Borla thoroughly.
- Ensure you have a clean workspace with adequate lighting.
- Check that all parts of the exhaust system are included and in good condition.
Step-by-Step Installation Guide
1. Remove the Old Exhaust System
Start by safely lifting your vehicle using jack stands. Remove the old exhaust system by following these steps:
- Disconnect the hangers and clamps securing the old exhaust.
- Cut the exhaust pipes if they are welded in place.
- Carefully remove the old system from the vehicle.
2. Prepare the New Borla S-Type Exhaust
Once the old exhaust is removed, prepare the new Borla S-type exhaust system for installation:
- Lay out all components of the new exhaust system.
- Check for any damage or missing parts.
- Familiarize yourself with the layout and connections of the new system.
3. Install the New Exhaust System
With the new exhaust system ready, begin the installation:
- Start by attaching the front pipe to the catalytic converter.
- Secure the connections with the provided clamps.
- Install the mid-pipes and make sure they fit snugly.
- Attach the rear section of the exhaust system to the mid-pipes.
- Ensure all hangers are properly aligned and secured.
4. Check for Proper Alignment
After installation, it’s important to check that everything is aligned correctly:
- Ensure that the exhaust tips are centered and aligned with the rear of the vehicle.
- Check that there is adequate clearance from the chassis and suspension components.
- Adjust any hangers or clamps as necessary to achieve proper positioning.
Final Steps and Testing
Once the exhaust system is installed and aligned, follow these final steps:
- Tighten all clamps and connections to the manufacturer’s specifications.
- Start the vehicle and listen for any unusual sounds.
- Check for leaks by feeling around the joints and listening for hissing sounds.
Maintenance Tips for Your Borla S-Type Exhaust
To keep your Borla S-type exhaust system in optimal condition, consider the following maintenance tips:
- Regularly inspect the exhaust system for rust or damage.
- Clean the exhaust tips to maintain their appearance.
- Check and tighten any loose clamps or hangers as needed.
- Consider using high-temperature paint to protect exposed areas.
Conclusion
Installing a Borla S-type exhaust system can greatly enhance your vehicle’s performance and sound. By following these installation tips, you can achieve a perfect fit and enjoy the optimal sound that Borla is known for. Always remember to perform regular maintenance to keep your exhaust system in top shape.