Installing a Garrett Gtx3582r for Subaru Wrx: a Step-by-step Guide

by

Installing a Garrett GTX3582R turbocharger on a Subaru WRX can significantly enhance performance and provide an exhilarating driving experience. This guide will walk you through the process step-by-step, ensuring that you have all the necessary information to complete the installation successfully.

Tools and Materials Needed

  • Garrett GTX3582R turbocharger
  • Turbocharger installation kit
  • Socket set and wrenches
  • Torque wrench
  • Intercooler piping
  • Silicone couplers
  • Vacuum lines
  • Oil feed and return lines
  • Coolant lines (if applicable)
  • Gaskets and seals
  • Shop towels
  • Safety glasses and gloves

Preparation

Before starting the installation, it is crucial to prepare your workspace and vehicle. Follow these steps:

  • Ensure the vehicle is parked on a level surface.
  • Disconnect the battery to prevent any electrical issues.
  • Gather all tools and materials in one place for easy access.

Removing the Stock Turbocharger

The first step in the installation process is to remove the stock turbocharger. Follow these detailed steps:

  • Remove the intake manifold to access the turbocharger.
  • Disconnect the oil feed and return lines from the stock turbo.
  • Remove the coolant lines if your WRX has them connected to the turbo.
  • Unbolt the turbocharger from the exhaust manifold.
  • Carefully remove the stock turbo from the engine bay.

Installing the Garrett GTX3582R

With the stock turbo removed, you can now install the Garrett GTX3582R. Follow these steps:

  • Position the Garrett GTX3582R in place and align it with the exhaust manifold.
  • Secure the turbocharger using the bolts provided in the installation kit.
  • Reconnect the oil feed line to the new turbocharger.
  • Attach the oil return line, ensuring a tight seal to prevent leaks.
  • If applicable, connect the coolant lines to the turbo.

Connecting the Intercooler and Piping

After the turbocharger is securely installed, the next step is to connect the intercooler and piping:

  • Install the intercooler piping, ensuring all connections are tight.
  • Use silicone couplers to connect the piping to the turbo and intercooler.
  • Check for any potential leaks in the piping system.

Electrical Connections

Next, you will need to make the necessary electrical connections:

  • Reconnect any electrical connectors that were disconnected during the removal of the stock turbo.
  • Ensure that all vacuum lines are properly connected to the new turbocharger.
  • Double-check all connections for security and correctness.

Final Checks and Reassembly

Before you complete the installation, perform the following final checks:

  • Inspect all lines and connections for any signs of leaks.
  • Ensure that all bolts are torqued to the manufacturer’s specifications.
  • Reinstall the intake manifold and any other components that were removed.

Testing the Installation

Once everything is reassembled, it’s time to test your installation:

  • Reconnect the battery and start the engine.
  • Allow the engine to idle and check for any unusual noises or leaks.
  • Take the vehicle for a test drive, monitoring performance and boost levels.

Conclusion

Installing a Garrett GTX3582R turbocharger in your Subaru WRX can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your new turbocharger.