Table of Contents
Installing a Jackson Racing Supercharger on your BRZ can significantly enhance its performance. This step-by-step guide will walk you through the entire installation process, ensuring that you can achieve optimal results.
Tools and Materials Needed
- Jackson Racing Supercharger Kit
- Socket set
- Torque wrench
- Ratchet and extensions
- Screwdrivers (flathead and Phillips)
- Pliers
- Wire cutters
- Electrical tape
- Vacuum hose
- Engine oil
- Coolant
Preparation
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation process.
Step 1: Remove the Stock Intake System
Begin by removing the stock intake system. This includes the air filter, intake tubing, and any associated sensors. Use your socket set to loosen and remove any clamps and bolts securing these components.
Step 2: Install the Supercharger Bracket
Next, install the supercharger bracket onto the engine. Align it according to the provided instructions and secure it with the bolts included in the kit. Make sure to torque the bolts to the manufacturer’s specifications.
Step 3: Mount the Supercharger
Once the bracket is installed, mount the supercharger onto the bracket. Ensure that it is properly aligned and secure it using the provided hardware. Double-check that all bolts are tightened appropriately.
Step 4: Connect the Intake and Intercooler
Connect the intake piping from the supercharger to the throttle body. Ensure that all clamps are tight and that the connections are secure. If your kit includes an intercooler, install it according to the instructions, connecting it to the supercharger and the intake system.
Step 5: Install the Fuel System Upgrades
The Jackson Racing Supercharger kit often requires fuel system upgrades. Install the new fuel injectors and fuel pump as specified in the installation manual. Ensure all connections are tight and leak-free.
Step 6: Connect Electrical Components
Connect any necessary electrical components, including sensors and the supercharger’s wiring harness. Follow the wiring diagram provided in the kit to ensure proper connections. Use electrical tape to secure any loose wires.
Step 7: Reinstall the Battery and Check Connections
Reinstall the battery and ensure all connections are secure. Double-check all hoses, wires, and bolts to confirm that everything is properly installed and tightened.
Step 8: Fill Fluids
Fill the engine with new engine oil and coolant as needed. Check the supercharger’s oil reservoir and fill it according to the manufacturer’s recommendations.
Step 9: Start the Engine
Start the engine and let it idle for a few minutes. Listen for any unusual noises and check for leaks. If everything sounds and looks good, proceed to take the vehicle for a short test drive.
Step 10: Final Checks
After your test drive, perform a final check of all connections and components. Ensure that there are no leaks and that the supercharger is functioning correctly. If everything is in order, you can enjoy the enhanced performance of your BRZ!
Conclusion
Installing a Jackson Racing Supercharger on your BRZ can be a rewarding project that enhances your vehicle’s performance. By following these step-by-step instructions, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.