Installing a Kw V3 Coilover Kit: Improve Handling and Gain 20% More Cornering Power

by

Upgrading your vehicle’s suspension can dramatically enhance its handling and performance. One of the best options available on the market is the KW V3 Coilover Kit. This kit not only improves handling but also provides a significant increase in cornering power, estimated at around 20%. In this article, we will guide you through the installation process of the KW V3 Coilover Kit.

What is a KW V3 Coilover Kit?

The KW V3 Coilover Kit is a high-performance suspension system designed for both street and track use. It features adjustable ride height and damping, allowing drivers to fine-tune their vehicle’s performance to suit their specific needs. The kit is engineered to provide improved handling characteristics, better ride quality, and increased cornering power.

Benefits of Installing a KW V3 Coilover Kit

  • Improved Handling: The KW V3 Coilover Kit allows for precise adjustments to both ride height and damping, resulting in better handling dynamics.
  • Increased Cornering Power: With an estimated 20% increase in cornering power, this kit enhances your vehicle’s performance during sharp turns.
  • Customizable Setup: The adjustable features enable you to tailor the suspension settings to your driving style and conditions.
  • Quality Construction: Built with high-quality materials, the KW V3 kit is designed to withstand the rigors of both daily driving and track use.

Tools and Materials Needed

  • KW V3 Coilover Kit
  • Jack and jack stands
  • Socket set
  • Wrench set
  • Spring compressors
  • Torque wrench
  • Measuring tape
  • Safety glasses
  • Gloves

Preparation for Installation

Before starting the installation process, ensure that you have all the necessary tools and materials at hand. Follow these steps to prepare:

  • Park your vehicle on a flat surface and engage the parking brake.
  • Loosen the lug nuts on the wheels while the vehicle is still on the ground.
  • Raise the vehicle using a jack and secure it with jack stands.
  • Remove the wheels to access the suspension components.

Step-by-Step Installation Process

Removing the Old Suspension

To install the KW V3 Coilover Kit, you first need to remove the existing suspension components. Follow these steps:

  • Locate the bolts securing the strut assembly to the vehicle.
  • Use a socket and wrench to remove the bolts.
  • Disconnect any sway bar links or other components attached to the strut.
  • Carefully remove the strut assembly from the vehicle.

Installing the KW V3 Coilover Kit

Once the old suspension is removed, you can proceed with the installation of the KW V3 Coilover Kit:

  • Using spring compressors, compress the coil spring on the KW V3 strut assembly.
  • Install the KW coilover assembly into the vehicle, ensuring it is properly aligned.
  • Secure the assembly with the bolts you previously removed, tightening them to the manufacturer’s specifications.
  • Reconnect any sway bar links or other components that were disconnected.

Adjusting Ride Height and Damping

After the installation, adjusting the ride height and damping settings is crucial for optimal performance:

  • Use the adjustable collars on the coilovers to set the desired ride height.
  • Adjust the damping settings according to your driving style and preferences.
  • Refer to the KW manual for recommended settings based on your vehicle and usage.

Final Steps

Once the coilovers are installed and adjusted, follow these final steps:

  • Reinstall the wheels and hand-tighten the lug nuts.
  • Lower the vehicle back to the ground and use a torque wrench to tighten the lug nuts to the specified torque.
  • Take the vehicle for a test drive to ensure everything is functioning correctly.
  • Recheck all bolts and adjustments after the test drive to ensure they are secure.

Conclusion

Installing a KW V3 Coilover Kit can significantly enhance your vehicle’s handling and cornering capabilities. With the right tools and careful attention to detail, you can complete the installation process and enjoy the benefits of improved performance. Always remember to follow safety precautions and consult the installation manual for specific guidance related to your vehicle model.