Table of Contents
Installing a Magnuson TVS2650 supercharger can significantly enhance the performance of your Charger. This step-by-step guide will walk you through the installation process, ensuring you achieve optimal results.
Tools and Materials Needed
- Magnuson TVS2650 Supercharger Kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Gasket maker
- Coolant
- Oil
- Safety goggles
- Gloves
Preparation
Before you begin the installation, it’s essential to prepare your workspace and vehicle. Ensure you have all necessary tools and materials ready.
Park your Charger on a flat surface and engage the parking brake. Disconnect the negative battery terminal to prevent any electrical issues during installation.
Removing the Stock Components
The first step in the installation process is to remove the stock components that will be replaced by the supercharger.
- Remove the air intake assembly.
- Disconnect any electrical connectors attached to the throttle body.
- Remove the throttle body from the intake manifold.
- Take off the stock supercharger (if applicable).
Installing the Magnuson TVS2650 Supercharger
With the stock components removed, you can now install the Magnuson TVS2650 supercharger.
- Apply a thin layer of gasket maker to the supercharger mounting surface.
- Position the Magnuson supercharger onto the intake manifold.
- Secure the supercharger using the provided bolts, tightening them to the manufacturer’s specifications.
- Reattach the throttle body to the supercharger.
- Reconnect any electrical connectors you previously disconnected.
Completing the Installation
Once the supercharger is securely in place, you will need to complete the installation by reassembling other components.
- Reinstall the air intake assembly.
- Check all connections and ensure everything is tightened properly.
- Fill the coolant reservoir and check the oil level.
Final Checks and Testing
Before starting your Charger, it’s important to perform final checks to ensure everything is in order.
- Double-check all hoses and connections for leaks.
- Ensure the supercharger belt is correctly aligned and tensioned.
- Reconnect the negative battery terminal.
Starting Your Charger
With everything in place, it’s time to start your Charger. Listen for any unusual sounds and monitor the gauges for proper readings.
Tuning Your Vehicle
After installation, it’s crucial to tune your vehicle to ensure it operates efficiently with the new supercharger. Consider visiting a professional for optimal tuning.
Conclusion
Installing a Magnuson TVS2650 supercharger on your Charger can greatly enhance its performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.