Table of Contents
The Toyota 86 is a beloved sports car known for its lightweight design and agile handling. However, for those seeking more power and performance, installing a Mishimoto Turbo Kit can be an excellent upgrade. This article provides a comprehensive, step-by-step guide to help you install a Mishimoto Turbo Kit on your Toyota 86, enhancing its performance and driving experience.
What You Will Need
- Mishimoto Turbo Kit
- Basic hand tools (sockets, wrenches, etc.)
- Torque wrench
- Oil and coolant
- Safety gear (gloves, goggles)
- Service manual for your Toyota 86
Preparation Before Installation
Before starting the installation, ensure you have all necessary tools and parts ready. It’s also crucial to work in a well-ventilated area and wear appropriate safety gear. Follow these steps to prepare:
- Read the Mishimoto Turbo Kit instructions thoroughly.
- Disconnect the battery to prevent any electrical issues.
- Drain the engine oil and coolant.
Step 1: Remove the Stock Components
To install the turbo kit, you must first remove several stock components from your Toyota 86. Follow these steps:
- Remove the engine cover and intake system.
- Disconnect the exhaust manifold and downpipe.
- Take off any necessary sensors and hoses.
Step 2: Install the Turbo Kit Components
With the stock components removed, you can now begin installing the Mishimoto Turbo Kit. This step involves several sub-steps:
2.1 Install the Turbocharger
Begin by mounting the turbocharger to the exhaust manifold. Ensure that you use the correct gaskets to prevent leaks.
2.2 Connect the Intercooler
Once the turbocharger is in place, connect the intercooler to the turbo. Follow the manufacturer’s instructions for proper alignment and securing.
2.3 Install the Intake and Exhaust Piping
Next, install the intake and exhaust piping. Make sure all clamps are tight and there are no leaks in the system.
2.4 Connect Oil and Coolant Lines
Connect the oil and coolant lines to the turbocharger. It’s essential to double-check these connections to avoid any potential issues.
Step 3: Reinstall the Removed Components
After installing the turbo kit components, it’s time to reinstall any parts you previously removed. Follow these steps:
- Reattach the intake system.
- Reconnect the exhaust system.
- Reinstall the engine cover.
Step 4: Fill Fluids and Check Connections
Before starting the engine, ensure that you fill the engine with oil and coolant. Check all connections to ensure they are secure and leak-free.
Step 5: Reconnect the Battery and Start the Engine
Reconnect the battery and start your Toyota 86. Listen for any unusual sounds and check for leaks. If everything sounds and looks good, you’re ready to hit the road!
Conclusion
Installing a Mishimoto Turbo Kit on your Toyota 86 can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the added power and excitement on the road. Always remember to consult the service manual and follow safety precautions during the installation process.