Table of Contents
Installing a ProCharger Stage 2 Supercharger can significantly enhance the performance of your Charger. This guide will walk you through the installation process step-by-step, ensuring that you have everything you need for a successful upgrade.
What You Will Need
- ProCharger Stage 2 Supercharger Kit
- Basic hand tools (wrenches, sockets, etc.)
- Torque wrench
- Safety glasses
- Mechanic’s gloves
- Installation instructions (provided with the kit)
Preparation
Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all necessary tools and components to avoid interruptions during the process.
Safety First
Always wear safety glasses and mechanic’s gloves while working on your vehicle. Disconnect the battery to prevent any electrical issues during installation.
Removing the Stock Components
The first step is to remove the stock air intake system and any components that may obstruct the installation of the supercharger.
- Disconnect the air intake hose from the throttle body.
- Remove the factory air filter and housing.
- Take out any bolts or screws securing the intake system.
Installing the ProCharger Supercharger
With the stock components removed, it’s time to install the ProCharger Stage 2 Supercharger. Follow the manufacturer’s instructions closely for best results.
- Position the supercharger bracket onto the engine.
- Secure the bracket using the provided bolts, ensuring they are tightened to the specified torque.
- Attach the supercharger unit to the bracket.
- Connect the necessary hoses and wiring as outlined in the installation manual.
Reinstalling Components
Once the supercharger is securely in place, you will need to reinstall the components that were removed earlier.
- Reattach the air intake system to the throttle body.
- Install the new air filter provided with your supercharger kit.
- Ensure all hoses and connections are secure and free of leaks.
Final Checks
Before starting the engine, perform a thorough inspection of your installation. Check for loose bolts, secure connections, and any signs of potential issues.
Starting the Engine
After confirming that everything is properly installed, reconnect the battery and start the engine. Listen for any unusual noises and monitor the performance closely.
Tuning Your Supercharger
Once the engine is running smoothly, you may need to tune your vehicle to optimize performance with the new supercharger. Consult a professional tuner if you are unsure how to proceed.
Maintenance Tips
To ensure longevity and performance from your ProCharger Stage 2 Supercharger, follow these maintenance tips:
- Regularly check and replace the air filter.
- Inspect hoses and connections for wear and tear.
- Schedule routine maintenance checks with a qualified mechanic.
Conclusion
Installing a ProCharger Stage 2 Supercharger can significantly boost your Charger’s performance. By following this step-by-step guide, you can achieve a successful installation and enjoy the enhanced driving experience.