Installing H&r Springs on B9 A4 2.0t: Cost, Process, and Handling Improvements

by

Installing H&R Springs on a B9 A4 2.0T can significantly enhance the vehicle’s handling and performance. This article will cover the cost, the installation process, and the improvements you can expect after the upgrade.

Understanding H&R Springs

H&R Springs is a well-known brand in the automotive aftermarket, specializing in high-performance suspension components. Their springs are designed to provide better handling, improved ride quality, and a more aggressive stance for vehicles.

Cost of H&R Springs for B9 A4 2.0T

The cost of H&R Springs for the B9 A4 2.0T varies based on the retailer and any additional components you may need. On average, you can expect to pay:

  • H&R Springs: $300 – $500
  • Installation Labor: $100 – $200
  • Alignment: $75 – $150

In total, the installation of H&R Springs can range from $475 to $850, depending on where you purchase the springs and whether you choose to have a professional installation.

Installation Process

Installing H&R Springs on your B9 A4 2.0T can be a rewarding project. Here’s a step-by-step guide to help you through the process:

  • Gather Tools and Materials: You will need basic hand tools, a jack, jack stands, and the new H&R Springs.
  • Lift the Vehicle: Use the jack to lift the front or rear of the vehicle and secure it with jack stands.
  • Remove the Wheels: Take off the wheels to access the suspension components.
  • Disconnect the Strut Assembly: Remove the bolts connecting the strut assembly to the hub and the upper mount.
  • Replace the Springs: Carefully remove the old springs and install the new H&R Springs onto the strut assembly.
  • Reassemble the Strut: Reattach the strut assembly back to the vehicle, ensuring all bolts are tightened to the manufacturer’s specifications.
  • Repeat for the Other Side: Follow the same steps for the opposite side of the vehicle.
  • Reinstall the Wheels: Put the wheels back on and lower the vehicle back to the ground.
  • Perform a Wheel Alignment: It is crucial to get a professional alignment after installing new springs to ensure optimal handling and tire wear.

By following these steps, you can successfully install H&R Springs on your B9 A4 2.0T and enjoy the benefits of improved handling.

Handling Improvements

One of the primary reasons for upgrading to H&R Springs is the noticeable improvement in handling. Here are some benefits you can expect:

  • Lower Center of Gravity: H&R Springs lower the vehicle’s height, which reduces body roll during turns.
  • Improved Responsiveness: The stiffer spring rates provide a more direct connection between the driver and the road.
  • Enhanced Stability: The upgraded springs help maintain better tire contact with the road, improving traction and stability.
  • Better Aesthetics: A lower stance gives the vehicle a more aggressive and sporty look.

These improvements can transform the driving experience, making it more enjoyable and engaging.

Conclusion

Installing H&R Springs on your B9 A4 2.0T is a worthwhile investment for those looking to enhance their vehicle’s performance and handling. With a reasonable cost and a straightforward installation process, you can enjoy a more responsive and sporty driving experience.