Table of Contents
The GR86 is a popular sports car known for its performance and handling. One of the most effective upgrades for enhancing its sound and performance is the installation of an aftermarket exhaust system. In this guide, we will walk you through the step-by-step process of installing the Invidia Q300 Exhaust System on your GR86.
Tools and Materials Needed
- Invidia Q300 Exhaust System
- Socket wrench set
- Torque wrench
- Jack and jack stands
- Safety goggles
- Gloves
- Penetrating oil
- Exhaust hanger removal tool
Preparation
Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all the necessary tools and materials listed above. Wearing safety goggles and gloves is highly recommended to protect yourself during the installation.
Step 1: Lifting the Vehicle
To access the exhaust system, you will need to lift the vehicle. Use a jack to raise the rear of the GR86 and secure it with jack stands. Ensure the vehicle is stable before proceeding.
Step 2: Removing the Stock Exhaust
Start by applying penetrating oil to the bolts connecting the stock exhaust to the exhaust manifold. Allow it to sit for a few minutes to loosen any rust or corrosion.
Using a socket wrench, remove the bolts securing the exhaust to the manifold. Be sure to keep these bolts, as you will need them for the new exhaust installation.
Next, use the exhaust hanger removal tool to detach the exhaust from the hangers. Carefully slide the stock exhaust out from under the vehicle. It may be helpful to have a friend assist you with this step.
Step 3: Installing the Invidia Q300 Exhaust
With the stock exhaust removed, it’s time to install the Invidia Q300 Exhaust System. Begin by positioning the new exhaust under the vehicle, aligning it with the hangers and the exhaust manifold.
Slide the exhaust into place and secure it to the exhaust manifold using the stock bolts you saved earlier. Tighten the bolts to the manufacturer’s specifications using a torque wrench.
Next, reattach the exhaust to the hangers. Ensure that the exhaust is properly aligned and fits snugly against the vehicle.
Step 4: Final Checks
Once the Invidia Q300 Exhaust is installed, double-check all connections and ensure everything is secure. Start the engine and listen for any unusual noises. If everything sounds good, lower the vehicle back to the ground.
Step 5: Enjoy the New Sound
With the installation complete, take your GR86 for a test drive. Enjoy the enhanced sound and performance that the Invidia Q300 Exhaust System provides. This upgrade not only improves the auditory experience but also enhances the overall performance of your vehicle.
Conclusion
Installing the Invidia Q300 Exhaust System on your GR86 is a rewarding project that can be completed with basic tools and a little patience. By following this step-by-step guide, you can enhance the performance and sound of your vehicle, making every drive a more exhilarating experience.