Installing the H&r Performance Suspension on Your Cla45 Amg: Step-by-step Guide for Better Handling

by

Upgrading your CLA45 AMG with the H&R Performance Suspension can significantly enhance handling and overall driving experience. This step-by-step guide will walk you through the installation process, ensuring you achieve optimal performance from your vehicle.

Tools and Materials Needed

  • H&R Performance Suspension Kit
  • Jack and jack stands
  • Socket set
  • Torque wrench
  • Spring compressors
  • Flathead screwdriver
  • Ratchet
  • Safety glasses

Before starting the installation, ensure you have all the necessary tools and materials at hand. Safety should be your top priority, so wear safety glasses and work in a well-ventilated area.

Step 1: Prepare Your Vehicle

Begin by parking your CLA45 AMG on a flat surface. Engage the handbrake and ensure the vehicle is secure before lifting it.

Lift the Vehicle

Using a jack, lift the front of the vehicle and place jack stands under the designated support points. Repeat this process for the rear of the vehicle. Ensure the vehicle is stable before proceeding.

Step 2: Remove the Existing Suspension

Start with the front suspension. Begin by removing the wheel using a socket set. Once the wheel is off, locate the suspension components that need to be removed.

  • Remove the sway bar links.
  • Disconnect the strut assembly from the hub.
  • Unbolt the top mount of the strut.
  • Carefully remove the strut from the vehicle.

Repeat the same process for the rear suspension. Make sure to keep all bolts and components organized for reinstallation.

Step 3: Install the H&R Performance Suspension

Now it’s time to install the new H&R Performance Suspension components. Start with the front struts.

  • Use spring compressors to compress the new springs.
  • Attach the new strut assembly to the top mount.
  • Reinstall the strut into the hub and secure it with bolts.
  • Reconnect the sway bar links.

Proceed to the rear suspension and follow the same steps for installation. Ensure all components are tightened to the manufacturer’s specifications using a torque wrench.

Step 4: Reassemble the Vehicle

Once the suspension is installed, it’s time to reassemble your vehicle. Start by putting the wheels back on and securing them with lug nuts.

  • Lower the vehicle back to the ground using the jack.
  • Remove the jack stands.
  • Ensure all bolts are tightened properly.

Double-check all components to ensure everything is in place and secure. This is crucial for safety and performance.

Step 5: Test Drive and Adjustments

After the installation is complete, take your CLA45 AMG for a test drive. Pay attention to how the vehicle handles and responds to turns and bumps.

  • Check for any unusual noises or vibrations.
  • Assess the ride height and adjust if necessary.
  • Consider a professional alignment for optimal performance.

Make any necessary adjustments to ensure your vehicle performs at its best. Enjoy the improved handling and ride quality that the H&R Performance Suspension provides!

Conclusion

Installing the H&R Performance Suspension on your CLA45 AMG can be a rewarding project that enhances your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of improved handling.