Manifold Mastery: Installing Eisenmann M3 Headers for Maximum Output

by

Upgrading your BMW M3 with Eisenmann headers can significantly enhance performance and sound. This guide will walk you through the installation process, ensuring you achieve maximum output from your vehicle.

Tools and Materials Needed

  • Eisenmann M3 Headers
  • Socket set
  • Torque wrench
  • Jack and jack stands
  • Safety goggles
  • Gloves
  • Exhaust gasket
  • Anti-seize compound

Preparation Steps

Before starting the installation, ensure you have a clean workspace and all necessary tools at hand. Follow these preparation steps:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent any electrical issues.
  • Lift the vehicle using a jack and secure it with jack stands.

Removing the Stock Headers

The first step in the installation process is removing the stock headers. Follow these instructions:

  • Remove the intake manifold to access the headers.
  • Disconnect any sensors or wiring harnesses attached to the headers.
  • Unbolt the headers from the engine block using a socket set.
  • Carefully remove the old headers from the exhaust system.

Installing the Eisenmann M3 Headers

With the stock headers removed, you can now install the Eisenmann M3 headers. Follow these steps:

  • Apply anti-seize compound to the bolt threads of the new headers.
  • Position the Eisenmann headers in place, aligning them with the engine block.
  • Secure the headers using the bolts, tightening them to the manufacturer’s specifications with a torque wrench.
  • Reconnect any sensors or wiring harnesses that were disconnected earlier.

Reassembling the Intake Manifold

After the headers are installed, you need to reassemble the intake manifold. Follow these steps:

  • Place a new exhaust gasket on the header flange.
  • Reattach the intake manifold, ensuring all connections are secure.
  • Reconnect the battery after all components are in place.

Final Checks and Testing

Once everything is reassembled, perform the following checks:

  • Inspect all connections for leaks or loose bolts.
  • Start the engine and listen for any unusual sounds.
  • Take the vehicle for a test drive to ensure optimal performance.

Conclusion

Installing Eisenmann M3 headers can greatly improve your vehicle’s performance and sound. By following this guide, you can ensure a successful installation and enjoy the benefits of enhanced output from your BMW M3.