Table of Contents
The N55 turbo upgrade from Pure Turbos is a popular modification for enthusiasts looking to enhance the performance of the 3.0L B58 engine. This guide will walk you through the installation process step-by-step, ensuring you have all the necessary tools and knowledge to complete the upgrade successfully.
Tools and Equipment Needed
- Socket set (metric)
- Torque wrench
- Flathead and Phillips screwdrivers
- Oil catch pan
- New turbocharger from Pure Turbos
- Gaskets and seals
- Heat-resistant gloves
- Safety glasses
Preparation Steps
Before starting the installation, make sure to prepare your workspace and gather all necessary tools. It’s also important to ensure that the engine is cool to avoid burns during the installation process.
Disconnect the Battery
To prevent any electrical issues, disconnect the negative terminal of the battery. This will ensure your safety while working on the engine.
Remove Engine Cover
Carefully remove the engine cover by unscrewing any bolts or clips holding it in place. Set it aside in a safe location.
Turbocharger Removal
With the engine cover removed, you can now access the turbocharger. Follow these steps to safely remove the old turbocharger.
Drain Engine Oil
Place an oil catch pan under the oil pan and drain the engine oil. This will prevent spills and make it easier to work on the turbocharger.
Disconnect Turbo Lines
Disconnect the intake and exhaust lines from the turbocharger. Use the appropriate socket size to remove the bolts and carefully pull the lines away from the turbo.
Remove the Turbocharger
Once the lines are disconnected, remove the bolts securing the turbocharger to the engine. Carefully lift the turbo out of its position and set it aside.
Installing the Pure Turbos Upgrade
Now that the old turbocharger is removed, it’s time to install the new Pure Turbos upgrade. Follow these steps carefully to ensure a proper installation.
Prepare New Turbocharger
Before installation, inspect the new turbocharger for any damage. Make sure all gaskets and seals are included and in good condition.
Install the New Turbocharger
Position the new turbocharger in place and secure it with the bolts. Make sure to torque the bolts to the manufacturer’s specifications to ensure a secure fit.
Reconnect Turbo Lines
Reconnect the intake and exhaust lines to the new turbocharger. Ensure that all connections are tight and secure to prevent leaks.
Final Steps
After the installation of the new turbocharger, there are a few final steps to complete before you can start the engine.
Refill Engine Oil
Refill the engine with the appropriate type and amount of oil. Check the owner’s manual for specifications.
Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure that it is secure and properly connected.
Start the Engine and Check for Leaks
Start the engine and let it run for a few minutes. Check for any leaks around the turbocharger and connections. If everything looks good, you’re ready to hit the road!
Conclusion
Upgrading to the N55 turbo from Pure Turbos can significantly enhance the performance of your 3.0L B58 engine. By following this installation guide, you can ensure a smooth and successful upgrade process. Always remember to take safety precautions and consult a professional if you encounter any issues during installation.