Table of Contents
The Audi RS5 2.9TT is a remarkable performance vehicle, and upgrading its suspension can significantly enhance its handling and ride quality. One of the most popular upgrades among enthusiasts is the Eibach Suspension Kit. In this article, we will explore how to install the Eibach Suspension Kit in just 3 hours for around $1,000.
Why Upgrade to Eibach Suspension Kit?
Upgrading to an Eibach Suspension Kit offers several benefits for RS5 owners:
- Improved Handling: The Eibach kit enhances cornering stability and reduces body roll.
- Adjustable Ride Height: Drivers can customize their vehicle’s stance for aesthetics or performance.
- Enhanced Comfort: The kit provides a smoother ride without sacrificing performance.
- Quality Materials: Eibach is known for its durable and high-quality suspension components.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Jack and jack stands
- Socket set
- Torque wrench
- Spring compressor
- Eibach Suspension Kit
- Safety glasses and gloves
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Begin by ensuring your vehicle is parked on a flat surface. Engage the parking brake and place wheel chocks behind the rear wheels for safety. Use the jack to lift the front of the vehicle and secure it on jack stands.
Step 2: Remove the Front Suspension Components
Start by removing the front wheels. Then, disconnect the sway bar links, brake lines, and any other components attached to the strut assembly. Make sure to label any components for easy reinstallation.
Step 3: Remove the Struts
Using your socket set, remove the bolts securing the strut to the steering knuckle. Carefully pull the strut assembly out of the vehicle. Be cautious of the spring tension during this process.
Step 4: Compress the Springs
Using a spring compressor, carefully compress the coil spring on the factory strut. Once compressed, remove the top nut and disassemble the strut assembly. Keep the spring and top mount for reinstallation.
Step 5: Install Eibach Springs
Place the Eibach spring onto the new strut. Reinstall the top mount and secure it with the top nut. Ensure everything is tightened according to the manufacturer’s specifications.
Step 6: Reinstall the Struts
Carefully position the new strut assembly back into the vehicle. Reattach it to the steering knuckle and tighten the bolts securely. Reconnect the sway bar links and brake lines.
Step 7: Repeat for the Rear Suspension
Follow the same steps to remove and replace the rear struts and springs. Make sure to check all connections and components for proper installation.
Step 8: Final Checks
Once all components are installed, double-check all bolts and connections for tightness. Lower the vehicle back to the ground and perform a test drive to assess the new suspension setup.
Cost Breakdown
The total cost for the Eibach Suspension Kit installation can be broken down as follows:
- Eibach Suspension Kit: Approximately $800
- Tools (if needed): Approximately $200
- Labor (if hired): Approximately $300
Conclusion
Installing an Eibach Suspension Kit on your Audi RS5 2.9TT can be a rewarding project that enhances the performance and aesthetics of your vehicle. With the right tools and a bit of patience, you can complete the installation in just 3 hours for around $1,000. Enjoy the improved handling and ride quality that comes with your new suspension setup!