Step-by-step B8 S4 Install of Awe Touring Exhaust: Sound and Power Improvements

by

The Audi B8 S4 is a performance-oriented sedan that offers a blend of luxury and power. One of the most popular upgrades among enthusiasts is the installation of an AWE Touring Exhaust. This upgrade not only enhances the vehicle’s sound but also improves its overall performance. In this article, we will guide you through a step-by-step installation process for the AWE Touring Exhaust on your B8 S4.

Tools and Materials Needed

  • AWE Touring Exhaust Kit
  • Socket set (including 13mm and 15mm sockets)
  • Ratchet and extensions
  • Torque wrench
  • Jack and jack stands
  • Safety goggles
  • Gloves
  • Cutting tool (if necessary)

Preparation Steps

Before starting the installation, it’s crucial to prepare your workspace and the vehicle. Follow these steps to ensure a smooth process:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Put on safety goggles and gloves for protection.
  • Raise the vehicle using a jack and secure it with jack stands.
  • Ensure the exhaust system is cool to the touch before beginning work.

Removing the Stock Exhaust

With the vehicle prepared, the next step is to remove the stock exhaust system. Follow these steps:

  • Locate the exhaust clamps connecting the stock exhaust to the downpipes.
  • Using the socket set, remove the bolts securing the clamps.
  • Carefully slide the stock exhaust off the downpipes.
  • If necessary, cut the exhaust hangers using a cutting tool to free the exhaust from the vehicle.
  • Remove the exhaust hangers from the rubber mounts.

Installing the AWE Touring Exhaust

Now that the stock exhaust is removed, it’s time to install the AWE Touring Exhaust. Here’s how to do it:

  • Begin by attaching the AWE exhaust hangers to the rubber mounts on the vehicle.
  • Align the AWE Touring Exhaust with the downpipes.
  • Slide the exhaust onto the downpipes and ensure a snug fit.
  • Reinstall the exhaust clamps and tighten the bolts using the socket set.
  • Check that all hangers are securely in place and the exhaust is properly aligned.

Final Adjustments and Testing

After the installation is complete, it’s essential to make final adjustments and test the exhaust system:

  • Double-check all bolts and clamps for tightness using a torque wrench.
  • Start the engine and listen for any unusual sounds.
  • Inspect the exhaust for leaks while the engine is running.
  • Take the vehicle for a short test drive to experience the sound and performance improvements.

Sound and Performance Improvements

One of the main reasons for upgrading to the AWE Touring Exhaust is the significant improvement in sound and performance. Here are some benefits you can expect:

  • Deeper and more aggressive exhaust note.
  • Improved throttle response and power delivery.
  • Weight reduction compared to the stock exhaust.
  • Enhanced driving experience with a sportier feel.

Conclusion

Installing the AWE Touring Exhaust on your B8 S4 is a rewarding project that enhances both the sound and performance of your vehicle. By following this step-by-step guide, you can achieve professional results right in your own garage. Enjoy the new sound and power that your upgraded exhaust brings to your driving experience!