Table of Contents
Installing a Jackson Racing Supercharger on your FA20 engine can significantly boost performance, providing over 50 horsepower gains. This guide will walk you through each step of the installation process, ensuring you have the knowledge and confidence to enhance your vehicle’s capabilities.
Tools and Materials Needed
- Jackson Racing Supercharger Kit
- Socket set
- Torque wrench
- Screwdrivers (flat and Phillips)
- Wrenches
- Pliers
- Shop towel
- Engine oil
- Coolant
- Safety goggles
- Gloves
Preparation
Before beginning the installation, ensure your vehicle is parked on a flat surface. Disconnect the battery to prevent any electrical issues during the process. Gather all tools and materials to avoid interruptions.
Step 1: Remove the Stock Intake System
Begin by removing the stock intake system. This includes the airbox and any associated tubing. Use your screwdriver and socket set to carefully detach all components. Make sure to keep track of all screws and parts for reinstallation.
Step 2: Install the Supercharger Bracket
With the intake system removed, locate the supercharger bracket included in your Jackson Racing kit. Align it with the mounting points on the engine and secure it using the provided bolts. Ensure all bolts are tightened to the manufacturer’s specifications using a torque wrench.
Step 3: Mount the Supercharger
Next, take the supercharger unit and carefully mount it onto the bracket. Ensure it is positioned correctly and securely fastened. Double-check that all connections are aligned with the engine components.
Step 4: Connect the Supercharger Piping
Once the supercharger is mounted, connect the supercharger piping. This includes the intake and discharge pipes. Use the provided clamps to secure the piping, ensuring there are no air leaks. Tighten all connections firmly.
Step 5: Install the Fuel System Upgrade
The Jackson Racing Supercharger kit often includes a fuel system upgrade. Follow the instructions to install the upgraded fuel pump and injectors. This step is crucial for ensuring your engine receives adequate fuel to support the increased power output.
Step 6: Reconnect the Battery
After all components are installed, reconnect the battery. Check all connections and ensure everything is secure before starting the engine. This will help prevent any electrical issues.
Step 7: Check Fluid Levels
Before starting your engine, check the engine oil and coolant levels. Top off any fluids as necessary to ensure optimal performance. This is an important step to prevent engine damage.
Step 8: Start the Engine
With everything in place, start the engine. Listen for any unusual noises and check for leaks. Allow the engine to idle for a few minutes while monitoring all systems. This is the moment to ensure everything is functioning correctly.
Step 9: Test Drive
After confirming everything is functioning smoothly, take your vehicle for a test drive. Pay attention to the throttle response and overall performance. You should notice a significant increase in power and acceleration.
Step 10: Final Check
After your test drive, perform a final check of all connections, bolts, and fluid levels. Make any necessary adjustments to ensure your supercharger is operating at peak performance. Regular maintenance checks will help prolong the life of your supercharger system.
Conclusion
Installing a Jackson Racing Supercharger on your FA20 can dramatically enhance your vehicle’s performance. By following this step-by-step guide, you can confidently complete the installation and enjoy the benefits of increased horsepower and improved driving experience.