Table of Contents
The Dodge Viper ACR is a high-performance sports car known for its raw power and aggressive styling. One of the best ways to enhance its performance and sound is by installing a Corsa Sport Exhaust. This step-by-step guide will walk you through the installation process, ensuring you achieve optimal results.
Tools and Materials Needed
- Corsa Sport Exhaust System
- Socket Set
- Wrench Set
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Torque Wrench
- Spray Lubricant
Before you begin, gather all the necessary tools and materials. This will help streamline the installation process and ensure you have everything on hand.
Preparation
Start by parking your Dodge Viper ACR on a level surface and engaging the parking brake. For safety, wear gloves and safety glasses throughout the process.
Next, use the jack to lift the rear of the vehicle and secure it with jack stands. This will provide you with better access to the exhaust system.
Removing the Stock Exhaust System
To install the Corsa Sport Exhaust, you must first remove the stock exhaust system. Begin by locating the exhaust hangers and using a spray lubricant to loosen them. This will make it easier to remove the exhaust.
Using your socket set, remove the bolts connecting the exhaust to the headers. Be sure to keep all the hardware, as you may need it for the new installation.
Carefully slide the stock exhaust system out from under the vehicle. You may need a friend to help you lift it out, as it can be heavy.
Installing the Corsa Sport Exhaust
Now that the stock exhaust is removed, it’s time to install the Corsa Sport Exhaust. Start by positioning the new exhaust components under the vehicle, aligning them with the mounting points.
Begin with the mid-pipes and connect them to the headers. Use the original bolts you saved earlier to secure them tightly. Follow the manufacturer’s instructions for specific torque specifications.
Next, attach the exhaust tips to the rear of the mid-pipes. Ensure they are positioned correctly and tighten the clamps securely.
Reinstalling Exhaust Hangers
With the Corsa Sport Exhaust in place, it’s time to reinstall the exhaust hangers. Make sure they are securely attached to the chassis of the vehicle. This will help prevent any vibrations or rattling noises during operation.
Final Checks
Before lowering the vehicle, double-check all connections and ensure everything is tightened to the correct torque specifications. This is crucial for the performance and longevity of your new exhaust system.
Once you are satisfied with the installation, carefully lower the vehicle back to the ground. Start the engine and listen for any unusual sounds. If everything sounds good, you’ve successfully installed your Corsa Sport Exhaust!
Conclusion
Installing a Corsa Sport Exhaust on your Dodge Viper ACR can significantly enhance its performance and sound. By following this step-by-step guide, you can ensure a successful installation. Enjoy the improved driving experience and the exhilarating sound of your Viper!