Table of Contents
The new Integra Type S has become a popular choice among car enthusiasts, and upgrading the intercooler is a common modification to enhance performance. In this article, we will go through a step-by-step installation of a Perrin intercooler, discussing costs, time, and expected results.
Why Upgrade to a Perrin Intercooler?
Upgrading to a Perrin intercooler offers several benefits for your Integra Type S:
- Improved Cooling Efficiency: A larger intercooler provides better cooling, which helps maintain optimal engine temperatures.
- Enhanced Performance: Improved airflow can lead to increased horsepower and torque.
- Durability: Perrin intercoolers are built with high-quality materials designed to withstand high pressures.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Socket set
- Wrench set
- Torque wrench
- Flathead and Phillips screwdrivers
- Perrin intercooler kit
- Silicone couplers and clamps
- Heat-resistant gloves
- Rags for cleanup
Step-by-Step Installation Process
Step 1: Preparation
Start by parking your Integra Type S on a flat surface and ensuring the engine is cool. Disconnect the battery to prevent any electrical issues during the installation.
Step 2: Remove the Stock Intercooler
Locate the stock intercooler. Use your socket set to remove the bolts securing it in place. Disconnect any piping and sensors attached to the intercooler. Carefully take it out and set it aside.
Step 3: Install the Perrin Intercooler
Position the Perrin intercooler in place of the stock unit. Ensure that it fits snugly and aligns with the mounting points. Use the provided hardware to secure it, following the manufacturer’s torque specifications.
Step 4: Connect the Piping
Attach the silicone couplers and clamps to the intercooler piping. Ensure all connections are tight and secure. Double-check for any leaks or loose fittings.
Step 5: Reconnect the Battery
Once everything is in place, reconnect the battery. Start the engine and let it idle for a few minutes to ensure everything is functioning correctly.
Step 6: Test Drive and Monitor
Take your Integra Type S for a test drive. Monitor the engine temperatures and performance. Make sure there are no unusual sounds or leaks.
Costs Involved
The total cost for upgrading to a Perrin intercooler can vary based on several factors:
- Perrin Intercooler Kit: Approximately $600 – $800.
- Additional Tools: If you need to purchase tools, budget around $100 – $200.
- Labor Costs: If you’re not doing it yourself, expect to pay $100 – $200 for installation.
Time Required for Installation
The installation of a Perrin intercooler typically takes around 3 to 5 hours, depending on your skill level and whether you have assistance.
Expected Results
After installing the Perrin intercooler, you can expect:
- Lower Intake Temperatures: A significant drop in intake temperatures, leading to better engine performance.
- Increased Horsepower: Depending on your setup, you may see gains of 10-20 horsepower.
- Improved Throttle Response: A more responsive throttle due to better airflow.
Conclusion
Installing a Perrin intercooler on the new Integra Type S is a rewarding project that can enhance your vehicle’s performance. With the right tools and careful attention to detail, you can achieve impressive results while enjoying the process of upgrading your car.