Table of Contents
Installing BBR Motorsports polyurethane bushings on your 450 HP EVO X can significantly enhance handling and performance. This guide will take you through the step-by-step process to ensure a successful installation.
Tools and Materials Needed
- BBR Motorsports polyurethane bushings
- Jack and jack stands
- Socket set
- Wrench set
- Torque wrench
- Grease
- Cutting tool (if necessary)
- Safety glasses
- Gloves
Preparation
Before starting the installation, ensure you have all the necessary tools and materials. Make sure the vehicle is parked on a flat surface and the engine is cool.
Step 1: Lifting the Vehicle
Using a jack, lift the front of the EVO X and secure it with jack stands. Ensure the vehicle is stable before proceeding.
Step 2: Removing the Old Bushings
Locate the old bushings that need to be replaced. Use the socket set to remove any bolts securing the components that house the bushings. Carefully take out the old bushings, using a cutting tool if necessary to free them from their housing.
Step 3: Preparing the New Bushings
Take the new BBR Motorsports polyurethane bushings and apply a thin layer of grease to the outer surface. This will help with installation and reduce friction.
Step 4: Installing the New Bushings
Insert the new bushings into their respective housings. Ensure they are seated properly. You may need to use a rubber mallet gently to tap them into place. Be careful not to damage the bushings during this process.
Step 5: Reinstalling Components
Once the new bushings are in place, reinstall the components that were removed earlier. Use the socket set and wrench to secure all bolts to the manufacturer’s specifications.
Step 6: Lowering the Vehicle
After everything is securely installed, carefully lower the vehicle back to the ground using the jack. Remove the jack stands once the vehicle is stable.
Step 7: Final Checks
With the vehicle back on the ground, perform a final inspection of all newly installed bushings and components. Ensure everything is tight and secure. Start the engine and check for any unusual noises or issues.
Conclusion
Installing BBR Motorsports polyurethane bushings on your 450 HP EVO X can greatly improve your vehicle’s performance. Following this step-by-step guide ensures that the installation process is smooth and effective. Enjoy your enhanced driving experience!