Table of Contents
The Subaru Forester is a versatile vehicle that can be enhanced significantly with the right performance parts. One of the most popular upgrades among enthusiasts is the installation of turbo components. In this guide, we will walk you through the step-by-step installation of Perrin Performance Turbo Components on your Subaru Forester.
Tools and Materials Needed
- Perrin Performance Turbo Kit
- Socket set
- Wrench set
- Torque wrench
- Flathead screwdriver
- Phillips screwdriver
- Oil catch can
- Coolant
- Engine oil
- Safety goggles
- Mechanics gloves
Preparation Steps
Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all tools and materials to avoid interruptions during the process.
1. Disconnect the Battery
Safety is paramount. Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation.
2. Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift it off and set it aside.
3. Drain Coolant and Oil
To avoid spills, drain the coolant from the radiator and the engine oil from the oil pan. Make sure to collect the fluids in appropriate containers.
Installing the Perrin Turbo Components
4. Install the Turbocharger
Begin by placing the turbocharger in position. Align it with the mounting points and secure it using the provided bolts. Refer to the Perrin installation manual for the correct torque specifications.
5. Connect the Turbo Inlet
Attach the turbo inlet to the turbocharger. Ensure it fits snugly and tighten the clamps to secure it in place.
6. Install the Wastegate
Position the wastegate onto the turbocharger and secure it with bolts. Make sure to connect the wastegate actuator as per the instructions in the manual.
7. Connect the Exhaust System
Reattach the exhaust system to the turbo outlet. Ensure all connections are tight and there are no leaks.
8. Install the Intercooler
Fit the intercooler in place, connecting it to the turbo outlet and the throttle body. Secure all connections and check for proper alignment.
9. Reconnect the Battery
Once all components are installed, reconnect the negative terminal of the battery. Ensure it is tightly secured.
Final Steps
10. Refill Coolant and Oil
Pour in new engine oil and refill the coolant to the appropriate levels. Check for any leaks around the new components.
11. Start the Engine
Start the engine and let it idle for a few minutes. Keep an eye on the gauges to ensure everything is functioning correctly.
12. Test Drive
Take your Subaru Forester for a test drive to experience the improvements in performance. Listen for any unusual noises and monitor the performance closely.
Conclusion
Installing Perrin Performance Turbo Components on your Subaru Forester can significantly enhance its performance and driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgraded turbo system.