Table of Contents
The Mercedes-Benz C63 S is renowned for its performance and luxury. Upgrading to the CSF 2000 Turbo can significantly enhance its power output, pushing it to over 550 horsepower. This guide will provide a detailed, step-by-step installation process for the CSF 2000 Turbo on the C63 S.
Tools and Materials Needed
- CSF 2000 Turbo Kit
- Socket set
- Torque wrench
- Flathead screwdriver
- Phillips screwdriver
- Wrenches (metric)
- Oil catch pan
- Coolant catch pan
- New oil and oil filter
- New coolant
Preparation Steps
Before starting the installation, ensure that you have all the necessary tools and materials at hand. Additionally, it is advisable to work in a well-ventilated area and wear appropriate safety gear.
1. Disconnect the Battery
The first step is to disconnect the battery to prevent any electrical issues during the installation process. Locate the battery in the trunk and remove the negative terminal.
2. Drain Fluids
Next, drain the engine oil and coolant. Place the oil catch pan under the oil pan and remove the drain plug. For the coolant, place the coolant catch pan under the radiator and open the drain valve.
Removing the Stock Turbo
3. Remove Engine Cover
Carefully remove the engine cover by unscrewing the bolts securing it in place. Set it aside in a safe location.
4. Disconnect Turbo Lines
Disconnect the intake and exhaust lines connected to the stock turbo. Use the appropriate wrenches to avoid damaging the fittings.
5. Unbolt the Stock Turbo
Using a socket set, unbolt the stock turbo from the manifold. Carefully lift it out and set it aside.
Installing the CSF 2000 Turbo
6. Prepare the New Turbo
Before installation, ensure that the CSF 2000 Turbo is ready. Check for any damage and ensure all necessary components are included in the kit.
7. Install the New Turbo
Position the CSF 2000 Turbo onto the manifold. Align it properly and secure it using the bolts removed earlier. Make sure to torque the bolts to the manufacturer’s specifications.
8. Reconnect Turbo Lines
Reconnect the intake and exhaust lines to the new turbo. Ensure that all connections are tight and secure to prevent any leaks.
Final Steps
9. Refill Fluids
After the installation, refill the engine oil and coolant. Make sure to use the correct type and amount as specified in the vehicle’s manual.
10. Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure that it is secure and free from corrosion.
11. Start the Engine
Start the engine and let it idle for a few minutes. Check for any leaks around the turbo and ensure that everything is functioning properly.
Conclusion
Installing the CSF 2000 Turbo on the C63 S can significantly enhance the vehicle’s performance. By following these steps carefully, you can achieve a horsepower increase to over 550, making your driving experience even more exhilarating.