Wheel Spacers Guide Installation: How to Fit H&r 20mm Spacers in 30 Minutes

by

Installing wheel spacers can enhance your vehicle’s stance and improve handling. This guide will walk you through the process of fitting H&R 20mm spacers in approximately 30 minutes.

What Are Wheel Spacers?

Wheel spacers are devices that fit between the wheel hub and the wheel itself. They serve several purposes, including:

  • Increasing the vehicle’s track width for improved stability.
  • Allowing for larger brake calipers or wheels.
  • Enhancing the aesthetic appeal of the vehicle.

Why Choose H&R 20mm Spacers?

H&R is a reputable brand known for its high-quality automotive components. Their 20mm spacers provide:

  • Durability and strength due to high-grade materials.
  • Precision engineering for a perfect fit.
  • Enhanced performance without compromising safety.

Tools Required for Installation

Before you begin, gather the following tools:

  • Socket wrench set
  • Torque wrench
  • Jack and jack stands
  • Wheel chocks
  • Clean cloth

Step-by-Step Installation Process

Step 1: Prepare Your Vehicle

Start by parking your vehicle on a flat surface. Engage the parking brake and place wheel chocks behind the rear wheels to prevent movement.

Step 2: Loosen the Wheel Bolts

Using a socket wrench, slightly loosen the wheel bolts on the wheel where you will install the spacers. Do not remove them completely at this stage.

Step 3: Raise the Vehicle

Use a jack to lift the vehicle off the ground. Secure it with jack stands to ensure safety during the installation process.

Step 4: Remove the Wheel

Now, remove the loosened wheel bolts completely and take off the wheel. Place it aside in a safe location.

Step 5: Clean the Hub Surface

Using a clean cloth, wipe the hub surface to remove any dirt or debris. This ensures a proper fit for the spacer.

Step 6: Install the H&R Spacer

Align the H&R spacer with the wheel hub and press it onto the surface. Ensure it sits flush against the hub.

Step 7: Reattach the Wheel

Place the wheel back onto the spacer. Hand-tighten the wheel bolts to secure the wheel in place.

Step 8: Torque the Wheel Bolts

Using a torque wrench, tighten the wheel bolts to the manufacturer’s specified torque settings. This ensures that the wheel is securely fastened.

Step 9: Lower the Vehicle

Carefully lower the vehicle back to the ground using the jack. Remove the jack stands once the vehicle is securely on the ground.

Step 10: Final Check

Double-check the tightness of the wheel bolts after lowering the vehicle. It’s a good practice to re-torque them after a short drive to ensure everything is secure.

Tips for Successful Installation

To ensure a smooth installation process, consider the following tips:

  • Always refer to the vehicle’s manual for specific torque settings.
  • Check local regulations regarding wheel spacers and modifications.
  • Inspect spacers and bolts regularly for wear and tear.

Conclusion

Installing H&R 20mm wheel spacers is a straightforward process that can be completed in about 30 minutes. By following this guide, you can enhance your vehicle’s performance and appearance with confidence.