Table of Contents
The AAM 370Z Turbo Kit is a popular upgrade for enthusiasts looking to boost the performance of their Nissan 370Z. This installation guide will walk you through each step of the process to ensure a successful installation.
Tools and Materials Needed
- Socket set
- Torque wrench
- Wrenches
- Screwdrivers
- Zip ties
- Heat-resistant tape
- Oil and coolant
- AAM 370Z Turbo Kit
Preparation Steps
Before starting the installation, it is crucial to prepare your workspace and your vehicle. Follow these steps:
- Park the vehicle on a flat surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues.
- Remove any engine covers or components that may obstruct access to the turbo installation area.
Step 1: Remove the Stock Components
Begin by removing the stock components that will be replaced by the turbo kit. This includes:
- Intake manifold
- Exhaust manifold
- Stock air intake system
Step 2: Install the Turbo Manifold
With the stock components removed, you can now install the turbo manifold. Follow these instructions:
- Align the turbo manifold with the engine block.
- Secure the manifold using the provided bolts, ensuring they are tightened to the manufacturer’s specifications.
- Check for any leaks or misalignments.
Step 3: Attach the Turbocharger
Next, attach the turbocharger to the manifold. Ensure that you follow these steps:
- Carefully position the turbocharger onto the manifold.
- Secure it with the provided hardware, making sure it is tightly fastened.
- Connect the oil feed and return lines to the turbo.
Step 4: Install the Intercooler and Piping
The intercooler plays a vital role in reducing the temperature of the air entering the engine. Follow these steps for installation:
- Mount the intercooler in the designated location.
- Connect the piping from the turbocharger to the intercooler.
- Ensure all clamps are secure and there are no leaks.
Step 5: Connect the Intake and Exhaust Systems
With the turbo and intercooler installed, you can now connect the intake and exhaust systems:
- Attach the intake piping from the intercooler to the throttle body.
- Connect the exhaust downpipe to the turbocharger.
- Make sure all connections are tight and properly sealed.
Step 6: Install the Fuel System Upgrades
To support the increased power, it is essential to upgrade the fuel system. Follow these steps:
- Replace the stock fuel injectors with high-performance injectors.
- Install a fuel pump that can handle the increased fuel demand.
- Ensure all fuel lines are securely connected and free of leaks.
Step 7: Reconnect the Battery and Check All Connections
Once all components are installed, it’s time to reconnect the battery:
- Reconnect the battery terminals.
- Double-check all connections and fittings for security.
- Ensure no tools or materials are left in the engine bay.
Step 8: Start the Engine and Check for Issues
With everything installed, start the engine and monitor for any issues:
- Listen for any unusual noises.
- Check for leaks in the oil, coolant, and intake systems.
- Allow the engine to warm up and check the turbo operation.
Final Checks and Adjustments
After the initial start-up, perform the following final checks:
- Re-torque all bolts after a short drive to ensure they are secure.
- Check the alignment of all piping and components.
- Perform a test drive to ensure the system operates smoothly.
Conclusion
The installation of the AAM 370Z Turbo Kit can significantly enhance the performance of your vehicle. By following this step-by-step guide, you can ensure a successful installation. Always remember to consult with a professional if you encounter any difficulties during the process.