A45 Amg Performance Headers: Installation Guide and Expected Gains of 25 Hp

The A45 AMG is known for its impressive performance, and upgrading to performance headers can significantly enhance its capabilities. This guide will walk you through the installation process and outline the expected horsepower gains.

Understanding Performance Headers

Performance headers are designed to improve exhaust flow from the engine, allowing for better efficiency and power output. By reducing back pressure, these headers can help your A45 AMG achieve optimal performance.

Tools and Materials Needed

  • Socket wrench set
  • Screwdrivers (flat and Phillips)
  • Torque wrench
  • Performance headers
  • Gasket maker or new gaskets
  • Exhaust clamps
  • Safety glasses
  • Gloves

Installation Steps

Step 1: Prepare the Vehicle

Before starting the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to avoid any electrical issues during the process.

Step 2: Remove the Old Headers

Begin by removing the engine cover, if applicable. Next, disconnect the exhaust system from the headers and remove any heat shields. Use the socket wrench to unbolt the old headers from the engine.

Step 3: Install the New Performance Headers

Position the new performance headers onto the engine, ensuring they align with the mounting points. Use new gaskets or gasket maker to create a proper seal. Tighten the bolts using a torque wrench to the manufacturer’s specifications.

Step 4: Reconnect the Exhaust System

Reconnect the exhaust system to the new headers, ensuring all clamps are secure. If you removed any heat shields, reinstall them at this stage.

Step 5: Reconnect the Battery and Test

Reconnect the battery and start the engine. Listen for any unusual sounds that may indicate a leak. Allow the engine to warm up before taking the vehicle for a test drive.

Expected Gains from Performance Headers

After installing performance headers, you can expect an increase of approximately 25 horsepower. This gain is a result of improved exhaust flow and reduced back pressure, allowing the engine to breathe better.

Additional Modifications for Enhanced Performance

  • Upgrading the air intake system
  • Installing a performance exhaust system
  • Tuning the ECU for optimal performance

Conclusion

Upgrading to performance headers on your A45 AMG can lead to significant performance improvements. With the right tools and a bit of patience, you can enhance your vehicle’s capabilities and enjoy the thrill of increased horsepower.