Table of Contents
The A90 Supra has taken the automotive world by storm, and one of the most popular modifications among enthusiasts is upgrading the exhaust system. This guide provides a comprehensive step-by-step approach to installing an exhaust system on your A90 Supra, along with valuable tips from top brands.
Tools and Materials Needed
Before you begin the installation process, gather the necessary tools and materials to ensure a smooth experience. Here’s a list of what you will need:
- Socket set (including extensions)
- Wrenches
- Jack and jack stands
- Exhaust hangers
- Safety glasses
- Gloves
- New exhaust system
- Anti-seize compound
Step 1: Prepare Your Vehicle
Start by preparing your A90 Supra for the installation. Make sure the vehicle is parked on a flat surface and the engine is cool.
Follow these sub-steps:
- Engage the parking brake.
- Use a jack to lift the rear of the car and secure it with jack stands.
- Remove any underbody covers if necessary for access.
Step 2: Remove the Stock Exhaust
With the vehicle secure, it’s time to remove the stock exhaust system. This process involves unbolting and detaching various components.
Follow these steps:
- Locate the exhaust flanges and remove the bolts using a socket wrench.
- Detach the exhaust hangers with a pry tool or by hand.
- Carefully remove the stock exhaust from the vehicle.
Step 3: Install the New Exhaust System
Now it’s time to install the new exhaust system. Make sure to follow the manufacturer’s instructions for the specific exhaust you purchased.
Here’s how to proceed:
- Position the new exhaust components in the correct sequence.
- Align the flanges and insert the bolts, tightening them securely.
- Attach the exhaust hangers to secure the exhaust in place.
Step 4: Check for Leaks
After installation, it’s crucial to check for any leaks that may have occurred during the process.
To do this:
- Start the engine and let it idle.
- Inspect all joints and connections for any signs of exhaust leaks.
- Listen for unusual noises that may indicate a problem.
Step 5: Finalize the Installation
Once you’ve confirmed there are no leaks, you can finalize the installation by ensuring everything is secured properly.
Follow these steps:
- Re-check all bolts and hangers for tightness.
- Lower the vehicle back to the ground.
- Replace any underbody covers that were removed.
Tips from Top Brands
Here are some expert tips from top exhaust brands to enhance your installation experience:
- Brand A: Always use new gaskets when installing a new exhaust system to prevent leaks.
- Brand B: Consider using a high-temperature anti-seize compound on bolts to make future removals easier.
- Brand C: Ensure that the exhaust is properly aligned before tightening to avoid stress on the hangers.
Conclusion
Installing an exhaust system on your A90 Supra can significantly enhance its performance and sound. By following this step-by-step guide and utilizing tips from top brands, you can ensure a successful installation. Enjoy your upgraded ride!