Aem Wrangler Exhaust Installation: Step-by-step Guide for Beginners

by

Installing an AEM Wrangler exhaust can significantly enhance your vehicle’s performance and sound. This step-by-step guide is designed for beginners, ensuring that you can confidently tackle this installation with ease.

Tools and Materials Needed

  • AEM Wrangler exhaust kit
  • Socket set
  • Wrench set
  • Screwdriver set
  • Jack and jack stands
  • Safety goggles
  • Gloves
  • Penetrating oil

Before starting your installation, gather all the necessary tools and materials. This will make the process smoother and more efficient.

Preparation Steps

Proper preparation is crucial for a successful exhaust installation. Follow these steps to prepare your Wrangler.

  • Park your vehicle on a flat surface.
  • Engage the parking brake.
  • Allow the exhaust system to cool down completely.
  • Use penetrating oil on exhaust bolts to loosen them.

Removing the Old Exhaust System

Once you are prepared, it’s time to remove the old exhaust system. Follow these steps carefully.

  • Use a jack to lift the rear of the vehicle.
  • Secure the vehicle with jack stands.
  • Locate the exhaust hangers and remove them using a wrench.
  • Disconnect the exhaust pipe from the catalytic converter.
  • Remove any remaining bolts holding the exhaust in place.
  • Carefully take out the old exhaust system from the vehicle.

Installing the AEM Wrangler Exhaust

Now that the old exhaust is removed, you can start installing your new AEM exhaust system. Follow these steps:

  • Position the new exhaust system under the vehicle.
  • Align the exhaust pipe with the catalytic converter.
  • Secure the exhaust pipe using the provided bolts and a wrench.
  • Reattach the exhaust hangers to hold the system in place.
  • Ensure all connections are tight and secure.

Final Checks and Testing

After installation, it’s essential to perform some final checks to ensure everything is in order.

  • Double-check all bolts and connections.
  • Remove the jack stands and lower the vehicle.
  • Start the engine and listen for any unusual noises.
  • Check for leaks around the exhaust connections.

Maintenance Tips

To keep your AEM Wrangler exhaust in top condition, follow these maintenance tips:

  • Regularly check for rust and corrosion.
  • Inspect exhaust hangers for wear and tear.
  • Clean the exhaust tips to maintain appearance.
  • Listen for any changes in sound that may indicate issues.

Conclusion

Installing an AEM Wrangler exhaust can be a rewarding project for beginners. With the right tools and guidance, you can enhance your vehicle’s performance and sound. Follow this step-by-step guide for a successful installation and enjoy your improved driving experience!