Ati Procharger Supercharger for 370z: a Complete Step-by-step Installation

by

The ATI ProCharger Supercharger is a popular upgrade for Nissan 370Z enthusiasts looking to boost performance. This article provides a complete step-by-step guide for installing the ProCharger on your 370Z, ensuring you get the most out of your vehicle.

Tools and Materials Needed

  • ATI ProCharger Supercharger Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Vacuum line
  • Coolant
  • Oil
  • Zip ties
  • Shop towels

Preparation

Before starting the installation, ensure that your 370Z is parked on a flat surface. Disconnect the battery to avoid any electrical issues during the installation process.

Remove the Front Bumper

To access the engine bay, you must first remove the front bumper. Follow these steps:

  • Remove the screws and clips securing the bumper.
  • Carefully pull the bumper away from the vehicle.
  • Disconnect any fog light or sensor connectors.

Remove the Stock Intake System

Next, you need to remove the stock intake system to make room for the ProCharger. This involves:

  • Disconnecting the mass airflow sensor.
  • Removing the air filter and intake pipes.
  • Taking out the throttle body if necessary.

Installing the ProCharger

With the stock components removed, you can now install the ATI ProCharger. Follow these steps closely:

Mount the ProCharger Bracket

Begin by installing the ProCharger bracket. This is crucial for securing the supercharger in place:

  • Align the bracket with the factory mounting points.
  • Use the provided bolts to secure the bracket.
  • Torque the bolts to the specified settings in the manual.

Install the Supercharger Unit

Once the bracket is secure, install the supercharger unit:

  • Position the supercharger onto the mounted bracket.
  • Secure it using the supplied hardware.
  • Double-check all connections for tightness.

Connect the Intake and Intercooler Piping

Next, connect the intake and intercooler piping to ensure proper airflow:

  • Attach the intake hose to the supercharger inlet.
  • Connect the intercooler piping to the outlet of the supercharger.
  • Ensure all clamps are tight and secure.

Install the Fuel System Upgrade

Upgrading the fuel system is essential for supporting the increased power:

  • Replace the stock fuel injectors with higher flow injectors.
  • Install the fuel pump upgrade if necessary.
  • Reconnect all fuel lines securely.

Final Steps

After the ProCharger is installed, there are a few final steps to complete:

Reconnect the Battery

Reconnect the battery and ensure all electrical connections are secure.

Check Fluid Levels

Before starting the engine, check all fluid levels, including coolant and oil. Top off if necessary.

Start the Engine

Start the engine and listen for any unusual noises. Allow it to idle for a few minutes and check for leaks.

Test Drive

Finally, take your 370Z for a test drive. Monitor the performance and ensure everything is functioning as expected.

Conclusion

The installation of the ATI ProCharger Supercharger on your 370Z can significantly enhance its performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and efficiency.