Table of Contents
When it comes to enhancing your vehicle’s performance and sound, an aftermarket exhaust system is one of the most impactful upgrades you can make. AWE Tuning is renowned for creating exhaust systems that not only improve performance but also deliver an unmistakable sound. This guide will walk you through the installation process and help you achieve that signature AWE note.
Understanding AWE Tuning Exhaust Systems
AWE Tuning exhaust systems are designed to optimize exhaust flow, reduce back pressure, and enhance engine performance. They are crafted from high-quality materials to ensure durability and longevity. Here are some key features of AWE exhaust systems:
- Performance Gains: Improved horsepower and torque.
- Signature Sound: A deep, aggressive tone that turns heads.
- Quality Construction: Made from T304 stainless steel for corrosion resistance.
- Easy Installation: Designed for a straightforward, bolt-on installation.
Tools and Materials Needed
Before you begin the installation process, gather the necessary tools and materials:
- Socket set
- Wrench set
- Jack and jack stands
- Safety goggles
- Exhaust system (AWE Tuning)
- Exhaust clamps (if not included)
- Lubricant (for bolts)
Step-by-Step Installation Guide
Step 1: Prepare Your Vehicle
Start by parking your vehicle on a level surface and engaging the parking brake. Raise the rear of the vehicle using a jack and secure it with jack stands. Always wear safety goggles when working under the vehicle.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system and identify the connection points. Use a socket or wrench to remove the bolts securing the exhaust to the catalytic converter and any hangers. Carefully lower the stock exhaust system and set it aside.
Step 3: Install the AWE Tuning Exhaust
Begin by positioning the AWE exhaust system in place. Align it with the mounting points and hangers. Use exhaust clamps or bolts (as required) to secure the exhaust system to the catalytic converter. Ensure all connections are tight but do not overtighten, as this may damage the components.
Step 4: Secure the Exhaust Hangers
Reattach the exhaust hangers to their respective mounting points. You may want to apply lubricant to the hangers to make the installation easier. Ensure that the exhaust is properly aligned and does not touch any other components of the vehicle.
Step 5: Double-Check Your Work
Before lowering the vehicle, double-check all connections and ensure everything is secure. Look for any potential leaks or misalignments. If everything looks good, remove the jack stands and lower the vehicle.
Step 6: Start the Engine
With the vehicle on the ground, start the engine and listen for any unusual sounds. The AWE Tuning exhaust should produce a deep, aggressive tone. Check for any exhaust leaks by feeling for air around the joints. If you notice any leaks, re-tighten the connections as needed.
Achieving the Signature AWE Note
The sound produced by an AWE Tuning exhaust system is one of its most appealing features. To ensure you achieve that signature note, consider the following tips:
- Break-In Period: Allow the exhaust to break in over time for optimal sound.
- Engine Tuning: Consider tuning your engine to maximize performance and sound.
- Driving Style: Your driving style can affect the sound; aggressive driving may enhance the exhaust note.
Maintenance Tips for Your AWE Exhaust System
To keep your AWE exhaust system in top condition, follow these maintenance tips:
- Regular Inspections: Check for rust or damage periodically.
- Clean the Exhaust: Use a mild cleaner to remove any buildup.
- Check Mounting Points: Ensure all bolts and clamps remain tight.
Conclusion
Installing an AWE Tuning exhaust system is a rewarding upgrade that enhances both performance and sound. By following this guide, you can install the system with confidence and enjoy the signature AWE note. Remember to perform regular maintenance to keep your exhaust in excellent condition for years to come.