Table of Contents
The Barra Performance Exhaust System is a popular upgrade for Subaru Forester owners looking to enhance their vehicle’s performance and sound. This guide will walk you through the installation process and provide a sound comparison to help you decide if this upgrade is right for you.
Why Upgrade to Barra Performance Exhaust?
Upgrading to a Barra Performance Exhaust System can significantly improve your Subaru Forester’s performance and sound. Here are some reasons to consider this upgrade:
- Improved Performance: Enhanced exhaust flow can lead to better horsepower and torque.
- Weight Reduction: Performance exhaust systems are often lighter than stock systems.
- Sound Enhancement: A more aggressive exhaust note can enhance the driving experience.
- Customizable Options: Various configurations are available to suit different preferences.
Tools and Materials Needed
Before starting the installation, ensure you have the following tools and materials:
- Socket set
- Wrench set
- Jack and jack stands
- Exhaust hanger removal tool
- Safety glasses
- Barra Performance Exhaust System
- New gaskets (if required)
Installation Steps
Follow these steps to install the Barra Performance Exhaust System on your Subaru Forester:
Step 1: Prepare Your Vehicle
Park your Subaru Forester on a flat surface and engage the parking brake. Use the jack to lift the vehicle and secure it with jack stands for safety.
Step 2: Remove the Stock Exhaust System
Using the socket and wrench set, remove the bolts securing the stock exhaust system. Carefully detach the exhaust hangers using the removal tool. Make sure to support the exhaust system as you remove the last bolts to prevent it from falling.
Step 3: Install the Barra Performance Exhaust System
Begin by positioning the Barra Performance Exhaust System in place. Align it with the existing mounting points and secure it with the provided bolts. Ensure that all hangers are properly attached.
Step 4: Check for Leaks
Once the system is installed, start the engine and let it idle. Listen for any unusual sounds that may indicate a leak. If everything sounds good, proceed to the next step.
Step 5: Lower the Vehicle
Carefully lower the vehicle back to the ground, remove the jack stands, and ensure everything is secure.
Sound Comparison
The sound produced by the Barra Performance Exhaust System is one of its most appealing features. Here’s a comparison between the stock exhaust and the Barra system:
- Stock Exhaust: Typically produces a quieter, more subdued sound.
- Barra Performance Exhaust: Offers a deeper, more aggressive tone that enhances the driving experience.
Conclusion
Upgrading to the Barra Performance Exhaust System on your Subaru Forester can provide significant benefits in terms of performance and sound. By following this installation guide, you can enhance your vehicle’s capabilities and enjoy a more exhilarating driving experience.