Table of Contents
Installing a Flowmaster American Thunder Turbo-back Exhaust on a Mustang GT can significantly enhance performance and sound. To achieve the best results, it’s essential to follow best practices during installation. This guide outlines key steps and considerations to ensure a successful installation.
Preparation Before Installation
Before you start the installation process, proper preparation is critical. This includes gathering the necessary tools and ensuring you have a clean workspace.
- Tools Needed:
- Socket set
- Wrench set
- Jack and jack stands
- Cutting tool (if necessary)
- Safety glasses
- Gloves
- Workspace Requirements:
- Flat surface
- Good lighting
- Clear of debris
Step-by-Step Installation Process
1. Raise the Vehicle
Use a jack to lift the Mustang GT and secure it with jack stands. Ensure the car is stable before proceeding.
2. Remove the Stock Exhaust System
Begin by disconnecting the stock exhaust. This may involve:
- Loosening the clamps that hold the exhaust pipes.
- Removing hangers using a pry bar if necessary.
- Cutting the exhaust if it is welded in place.
3. Prepare the Flowmaster Exhaust System
Unbox the Flowmaster American Thunder Turbo-back Exhaust and lay out all components. Ensure you have all parts and consult the instruction manual for specifics.
4. Install the New Exhaust System
Follow these sub-steps to install the new exhaust:
- Start with the mid-pipe, aligning it with the factory connection points.
- Attach the hangers to their designated spots.
- Install the mufflers, ensuring they are positioned correctly for optimal sound.
- Finally, connect the tailpipes.
5. Tighten All Connections
Ensure all clamps and bolts are tightened securely. Double-check each connection to prevent leaks.
6. Lower the Vehicle
Carefully lower the Mustang GT back to the ground. Make sure everything is secure before taking the car off the jack stands.
Post-Installation Checks
After installation, perform the following checks to ensure everything is functioning correctly:
- Start the engine and listen for any unusual noises.
- Check for exhaust leaks around the connections.
- Inspect the alignment of the exhaust tips.
Maintenance Tips
To keep your Flowmaster exhaust system in top condition, consider the following maintenance tips:
- Regularly check for loose clamps and bolts.
- Inspect the exhaust for rust or damage.
- Clean the exhaust tips to maintain appearance.
Conclusion
Installing a Flowmaster American Thunder Turbo-back Exhaust on your Mustang GT can enhance performance and sound. By following these best practices, you can ensure a successful installation and enjoy the benefits of your new exhaust system for years to come.