Table of Contents
The Subaru BRZ, known for its lightweight and agile handling, becomes even more thrilling with the installation of a turbo kit. The FA20 turbo kit allows enthusiasts to achieve over 350 horsepower, transforming the driving experience. This article will guide you through the installation process of the Boost Logic system for your BRZ FA20.
Understanding the Boost Logic System
The Boost Logic system is designed to enhance the performance of your BRZ by providing a significant power increase through forced induction. This system includes essential components such as a turbocharger, intercooler, and necessary plumbing to ensure optimal performance.
Required Tools and Materials
- Socket set
- Wrenches
- Torque wrench
- Drill
- Turbo kit (including turbocharger, intercooler, piping, etc.)
- Engine management system (ECU tuning)
- Oil and coolant
Installation Steps
Step 1: Preparation
Before starting the installation, ensure that your BRZ is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation process.
Step 2: Remove the Stock Components
Begin by removing the stock intake system and exhaust manifold. This may require loosening bolts and disconnecting various sensors. Keep track of all hardware for reinstallation.
Step 3: Install the Turbocharger
Position the turbocharger where the stock exhaust manifold was located. Ensure that all mounting points align correctly. Use the provided hardware to secure the turbocharger in place, following the manufacturer’s torque specifications.
Step 4: Install the Intercooler
Next, install the intercooler in the front of the vehicle. This may require modifying the front bumper or using brackets for support. Connect the piping from the turbocharger to the intercooler, ensuring all connections are tight and leak-free.
Step 5: Connect the Intake and Exhaust
Attach the intake piping to the turbocharger and connect the exhaust system to the outlet of the turbo. Make sure all connections are secure and properly aligned to prevent any exhaust leaks.
Step 6: Install Engine Management System
With the hardware installed, it’s crucial to update the engine management system. This will optimize the vehicle’s performance and ensure that the new turbo system operates efficiently. Follow the manufacturer’s instructions for ECU tuning.
Step 7: Final Checks
Before starting the engine, double-check all connections, bolts, and wiring. Reconnect the battery and ensure there are no leaks in the system. It’s advisable to perform a thorough inspection before taking the vehicle for a test drive.
Testing and Tuning
After installation, it’s important to test the vehicle to ensure everything is functioning correctly. Monitor boost levels, engine temperatures, and overall performance. Adjust the ECU tuning as necessary to achieve the desired power output.
Conclusion
Installing a turbo kit on your BRZ FA20 can unlock its full potential, providing an exhilarating driving experience with over 350 horsepower. By following the steps outlined in this article, you can successfully install the Boost Logic system and enjoy the enhanced performance of your vehicle.