Table of Contents
The Subaru BRZ FA24 is a sports car that has garnered attention for its impressive handling and performance. However, for enthusiasts looking to enhance their driving experience, upgrading the exhaust system can make a significant difference. This article will guide you through the process of installing an upgraded titanium exhaust system on your BRZ FA24.
Why Upgrade to a Titanium Exhaust System?
Titanium exhaust systems offer several advantages over traditional stainless steel or other materials. Here are some key benefits:
- Weight Reduction: Titanium is significantly lighter than stainless steel, which can improve overall vehicle performance.
- Increased Durability: Titanium is resistant to corrosion and can withstand high temperatures, making it a long-lasting option.
- Improved Sound: A titanium exhaust system can provide a more aggressive and sporty sound, enhancing the driving experience.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Upgraded titanium exhaust system
- Ratchet and socket set
- Torque wrench
- Jack and jack stands
- Safety goggles and gloves
- Exhaust hangers (if needed)
Step-by-Step Installation Process
1. Prepare Your Vehicle
Begin by parking your Subaru BRZ on a flat surface. Engage the parking brake and make sure the engine is off. Use a jack to lift the rear of the vehicle and secure it with jack stands for safety.
2. Remove the Stock Exhaust System
Locate the stock exhaust system and identify all the mounting points. Using your ratchet and socket set, remove the bolts securing the exhaust to the exhaust manifold and the hangers. Carefully lower the stock exhaust and set it aside.
3. Install the Titanium Exhaust System
Position the upgraded titanium exhaust system in place. Align it with the exhaust manifold and hangers. Hand-tighten the bolts to secure the exhaust system temporarily.
4. Torque the Bolts
Using a torque wrench, tighten the bolts to the manufacturer’s specified torque settings. This ensures a secure and leak-free installation.
5. Check for Proper Fit and Clearance
Inspect the installation to ensure that the exhaust system is properly aligned and has sufficient clearance from other components. Adjust as necessary.
6. Reinstall Exhaust Hangers
If your new exhaust system requires different hangers, install them now. Ensure that the exhaust is securely supported and does not move excessively.
7. Lower the Vehicle
Once everything is installed and checked, carefully lower the vehicle back to the ground. Remove the jack stands and jack.
8. Start the Engine
Start your BRZ and listen for any unusual sounds. Ensure that the exhaust is functioning properly and there are no leaks.
Conclusion
Installing an upgraded titanium exhaust system on your Subaru BRZ FA24 can significantly enhance both performance and sound. By following the steps outlined in this article, you can achieve a successful installation and enjoy the benefits of your new exhaust system. Always remember to consult your vehicle’s manual for specific torque settings and procedures to ensure the best results.