Table of Contents
The C63 AMG is a high-performance vehicle known for its power and agility. However, to truly unlock its potential on the track, a performance brake upgrade is essential. This guide will walk you through the steps to upgrade your C63 AMG brakes from stock to track-ready in just three hours.
Why Upgrade Your Brakes?
Upgrading your brakes can significantly improve your vehicle’s performance. Here are some reasons to consider a brake upgrade:
- Improved Stopping Power: Performance brakes provide better stopping distances, especially under heavy braking conditions.
- Heat Resistance: Upgraded brakes can withstand higher temperatures, reducing brake fade during intense driving.
- Enhanced Pedal Feel: Performance brake systems often offer a firmer pedal feel, giving drivers more confidence.
- Better Longevity: High-quality components tend to last longer than stock parts, saving money in the long run.
Tools and Materials Needed
Before starting the upgrade, ensure you have the following tools and materials:
- Tools:
- Jack and jack stands
- Socket set
- Torque wrench
- Brake cleaner
- Brake line wrench
- Materials:
- Performance brake pads
- Performance rotors
- Brake fluid (high-performance type)
- Brake hardware kit
Step-by-Step Upgrade Process
Step 1: Prepare Your Vehicle
Begin by parking your C63 AMG on a flat surface. Engage the parking brake and place wheel chocks behind the rear wheels for safety.
Step 2: Remove the Wheels
Using a jack, lift the front of the vehicle and secure it with jack stands. Remove the front wheels to access the brake components.
Step 3: Remove Stock Brake Components
Detach the caliper by removing the bolts securing it to the bracket. Carefully slide the caliper off the rotor and support it using a bungee cord to avoid straining the brake line.
Next, remove the stock brake pads from the caliper bracket. Take out the rotor by removing the retaining screws, if applicable.
Step 4: Install Performance Rotors
Place the new performance rotor onto the hub. Ensure it sits flush and secure it with the retaining screws.
Step 5: Install Performance Brake Pads
Insert the performance brake pads into the caliper bracket. Make sure they are seated properly and aligned with the rotor.
Step 6: Reattach the Caliper
Carefully slide the caliper back over the new brake pads and rotor. Secure it by tightening the caliper bolts to the manufacturer’s specified torque settings.
Step 7: Repeat for Rear Brakes
Follow the same steps for the rear brake components. Ensure you remove the rear wheels and access the calipers and rotors as done in the front.
Step 8: Bleed the Brake System
Once all components are installed, it’s crucial to bleed the brake system. This step removes any air trapped in the brake lines, ensuring optimal performance.
Step 9: Reinstall Wheels
After bleeding the brakes, reinstall the wheels. Lower the vehicle back to the ground and torque the wheel nuts to the recommended specifications.
Step 10: Test Drive
Finally, take your C63 AMG for a test drive. Start with gentle braking to bed in the new pads, then gradually increase intensity to ensure everything is functioning correctly.
Conclusion
Upgrading the brakes on your C63 AMG can transform your driving experience, especially on the track. With this guide, you can complete the upgrade in just three hours, enhancing your vehicle’s performance and safety. Enjoy the thrill of improved stopping power and confidence on the road!