Table of Contents
The 2020 Toyota Supra is a remarkable sports car that combines performance and style. One way to enhance its performance and longevity is by installing a catch can. A catch can helps prevent oil blow-by from entering the intake system, which can lead to engine wear and decreased performance. In this article, we will guide you through the step-by-step process of installing a catch can on your 2020 Toyota Supra, along with the performance benefits it offers.
Understanding the Catch Can
A catch can is an aftermarket component that captures oil vapors and contaminants from the engine’s crankcase ventilation system. By preventing these substances from re-entering the intake manifold, a catch can helps maintain cleaner combustion and improves engine efficiency. Here are some key benefits of installing a catch can:
- Reduces carbon buildup in the intake manifold.
- Improves throttle response and overall engine performance.
- Extends the life of engine components.
- Enhances fuel efficiency.
Tools and Materials Needed
Before starting the installation, gather the following tools and materials:
- Catch can kit (specific for the 2020 Toyota Supra)
- Socket set
- Wrenches
- Hose cutter or scissors
- Drill with appropriate bits (if necessary)
- Zip ties or clamps
- Rags for cleanup
Step-by-Step Installation Guide
Step 1: Prepare Your Workspace
Ensure your vehicle is parked on a flat surface, and the engine is cool. Open the hood and disconnect the battery to avoid any electrical issues during the installation.
Step 2: Locate the PCV System
Identify the Positive Crankcase Ventilation (PCV) system in your Supra. This system typically consists of hoses connecting the engine’s crankcase to the intake manifold.
Step 3: Remove the Stock PCV Hose
Carefully disconnect the stock PCV hose from the engine and the intake manifold. You may need to use a wrench or pliers to loosen any clamps. Set the stock hose aside as you will be replacing it with a new hose that connects to the catch can.
Step 4: Install the Catch Can
Mount the catch can in a suitable location within the engine bay. Ensure it is secure and will not interfere with any moving parts. Use zip ties or clamps to secure the catch can in place.
Step 5: Connect Hoses
Using the new hoses provided in your catch can kit, connect one end to the engine’s PCV outlet and the other end to the inlet on the catch can. Repeat this process for the outlet of the catch can, connecting it to the intake manifold. Ensure all connections are tight and secure.
Step 6: Check for Leaks
Before reassembling everything, double-check all connections for any potential leaks. Start the engine and allow it to idle for a few minutes while inspecting the area around the catch can. If you notice any leaks, tighten the connections as needed.
Step 7: Reconnect the Battery
Once you are confident there are no leaks, reconnect the battery. Close the hood and take your Supra for a test drive. Monitor the catch can to ensure it operates correctly.
Maintenance Tips for Your Catch Can
To ensure your catch can continues to perform effectively, regular maintenance is essential. Here are some tips:
- Check the catch can regularly for oil accumulation and empty it as needed.
- Inspect hoses for wear or damage and replace them if necessary.
- Clean the catch can periodically to prevent buildup of contaminants.
Conclusion
Installing a catch can on your 2020 Toyota Supra is a straightforward process that can yield significant performance benefits. By following this step-by-step guide, you can enhance your vehicle’s efficiency and protect its engine from harmful contaminants. Enjoy the improved performance and peace of mind that comes with a well-maintained catch can system.