Table of Contents
The Civic Type R is renowned for its performance, and upgrading the exhaust system can enhance both power and sound. This guide will walk you through the step-by-step process of installing a MagnaFlow exhaust system on your Civic Type R.
Tools and Materials Needed
- MagnaFlow Exhaust System
- Socket Set
- Torque Wrench
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Cutting Tool (if necessary)
Before starting the installation, make sure you have all the necessary tools and materials on hand. This will ensure a smooth and efficient process.
Preparation
Begin by parking your Civic Type R on a flat surface. Engage the parking brake and disconnect the battery to avoid any electrical issues during the installation.
Raise the Vehicle
Using a jack, lift the vehicle and secure it with jack stands. Ensure that the car is stable before crawling underneath.
Remove the Stock Exhaust
Locate the stock exhaust system. Start by removing the exhaust hangers using a socket wrench. Be cautious as the exhaust may still be hot if the vehicle was recently driven.
Disconnect the Exhaust
Once the hangers are detached, locate the bolts connecting the exhaust to the catalytic converter. Use a socket wrench to remove these bolts and carefully slide the stock exhaust out from under the vehicle.
Install the MagnaFlow Exhaust
Now that the stock exhaust is removed, it’s time to install the new MagnaFlow exhaust system. Begin by aligning the new exhaust with the catalytic converter.
Secure the Exhaust
Insert the bolts into the connection point and tighten them using a torque wrench. Follow the manufacturer’s specifications for the correct torque settings.
Attach the Hangers
With the exhaust secured at the connection point, reattach the exhaust hangers. Ensure they are firmly in place to prevent any rattling or movement during operation.
Final Checks
Before lowering the vehicle, double-check all connections and ensure everything is tightened to the correct specifications. This step is crucial for preventing leaks and ensuring optimal performance.
Lower the Vehicle
Carefully remove the jack stands and lower the vehicle back to the ground. Reconnect the battery once the car is securely on the ground.
Testing the Exhaust
Start the engine and listen for any unusual sounds. Ensure that the exhaust is functioning properly and that there are no leaks. A properly installed MagnaFlow exhaust should enhance the sound and performance of your Civic Type R.
Conclusion
Installing a MagnaFlow exhaust system on your Civic Type R can significantly improve its performance and sound. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgraded exhaust system.