Civic Type R Turbo Installation Guide: Installing a Borgwarner Efr 7163 for 350+ Hp

by

The Honda Civic Type R is a popular choice among car enthusiasts, especially those looking to enhance performance. One of the most effective upgrades is installing a BorgWarner EFR 7163 turbocharger, which can help achieve over 350 horsepower. This guide will walk you through the installation process step-by-step, ensuring you have a smooth experience.

Tools and Materials Needed

  • BorgWarner EFR 7163 Turbocharger
  • Turbocharger installation kit
  • Socket set
  • Wrenches
  • Torque wrench
  • Boost gauge
  • Oil catch can
  • Silicone hoses
  • Intercooler piping
  • Engine oil
  • Coolant

Preparation Steps

Before starting the installation, it’s crucial to prepare your workspace and vehicle. Ensure you have all the necessary tools and materials ready. Follow these steps to prepare:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative terminal of the battery.
  • Drain the engine oil and coolant.
  • Remove the stock turbocharger and associated components.

Installing the BorgWarner EFR 7163 Turbocharger

Once the preparation steps are complete, you can begin the installation of the BorgWarner EFR 7163 turbocharger. Follow these steps carefully:

  • Install the turbocharger mounting flange onto the engine.
  • Align the EFR 7163 turbocharger with the mounting flange.
  • Secure the turbocharger using the provided bolts and a torque wrench to ensure proper tightness.
  • Connect the oil feed and return lines to the turbocharger.
  • Install the coolant lines, ensuring there are no leaks.
  • Attach the intake and exhaust piping to the turbocharger.
  • Connect the silicone hoses and ensure they are secure.

Setting Up the Boost Gauge

To monitor the performance of your new turbocharger, installing a boost gauge is essential. Here’s how to set it up:

  • Locate a suitable mounting location for the boost gauge inside the vehicle.
  • Run the vacuum line from the intake manifold to the gauge.
  • Connect the gauge to a power source for illumination.
  • Test the gauge to ensure it reads correctly.

Final Checks and Testing

After the installation is complete, it’s important to perform final checks before taking your Civic Type R for a test drive. Follow these steps:

  • Double-check all connections and fittings for leaks.
  • Refill the engine oil and coolant.
  • Reconnect the negative battery terminal.
  • Start the engine and let it idle for a few minutes.
  • Monitor the boost gauge for any irregularities.
  • Take the vehicle for a short test drive, gradually increasing speed to assess performance.

Tuning for Optimal Performance

After installing the BorgWarner EFR 7163 turbocharger, tuning your engine is vital for optimal performance. Consider the following:

  • Use a reputable tuning software or service to adjust fuel maps and ignition timing.
  • Monitor air-fuel ratios to ensure the engine runs efficiently.
  • Consider upgrading the fuel system if necessary to support increased power levels.

Conclusion

Installing a BorgWarner EFR 7163 turbocharger on your Civic Type R can significantly enhance its performance, allowing you to achieve over 350 horsepower. By following this guide, you can ensure a successful installation and enjoy the benefits of your upgraded vehicle. Always remember to perform regular maintenance and tuning to keep your turbocharged engine running smoothly.