Clutch Upgrade Guide: Installing a Centerforce Dfx for 600+ Hp Applications

by

When it comes to high-performance vehicles, the clutch plays a crucial role in transferring power from the engine to the wheels. For those pushing their horsepower beyond 600, upgrading to a Centerforce DFX clutch can make a significant difference in performance and reliability. This guide will walk you through the steps to install a Centerforce DFX clutch, ensuring your vehicle can handle the power demands.

Why Upgrade to a Centerforce DFX Clutch?

The Centerforce DFX clutch is specifically designed for high-performance applications, offering superior grip and heat resistance. Here are some reasons to consider this upgrade:

  • Increased Torque Capacity: The DFX clutch can handle extreme torque loads, making it ideal for high-horsepower setups.
  • Improved Pedal Feel: Enhanced design allows for a more responsive pedal feel, improving driver control.
  • Durability: Built with high-quality materials to withstand the rigors of racing and spirited driving.

Tools and Materials Needed

Before starting the installation, gather the necessary tools and materials:

  • Centerforce DFX Clutch Kit
  • Torque Wrench
  • Socket Set
  • Ratchet
  • Clutch Alignment Tool
  • Jack and Jack Stands
  • Safety Glasses
  • Mechanic’s Gloves

Step-by-Step Installation Guide

Step 1: Prepare the Vehicle

Begin by ensuring your vehicle is parked on a level surface. Engage the parking brake and disconnect the battery to prevent any electrical issues during the installation.

Step 2: Remove the Transmission

To access the clutch, the transmission must be removed. Follow these steps:

  • Support the transmission with a jack.
  • Remove the transmission bolts using a socket set.
  • Disconnect the driveshaft and any electrical connections.
  • Carefully slide the transmission out of the bellhousing.

Step 3: Remove the Old Clutch

With the transmission removed, you can now access the clutch assembly. Follow these steps:

  • Remove the pressure plate bolts using a socket set.
  • Carefully take off the pressure plate and disc.
  • Inspect the flywheel for any damage or wear.
  • Clean the flywheel surface to ensure proper contact with the new clutch.

Step 4: Install the Centerforce DFX Clutch

Now it’s time to install the new Centerforce DFX clutch:

  • Place the new clutch disc onto the flywheel, ensuring it is oriented correctly.
  • Use the clutch alignment tool to center the disc.
  • Install the pressure plate over the disc and align it with the bolt holes.
  • Tighten the pressure plate bolts in a crisscross pattern to ensure even pressure.

Step 5: Reinstall the Transmission

With the new clutch installed, it’s time to put the transmission back in place:

  • Carefully slide the transmission back into the bellhousing.
  • Reconnect the driveshaft and any electrical connections.
  • Reinstall the transmission bolts and tighten them to the manufacturer’s specifications.

Step 6: Final Checks

Before finishing up, perform these final checks:

  • Reconnect the battery.
  • Check the clutch fluid levels and top off if necessary.
  • Ensure all bolts and connections are secure.

Testing Your New Clutch

After installation, it’s essential to test your new Centerforce DFX clutch:

  • Start the vehicle and let it idle for a few minutes.
  • Engage the clutch and shift through the gears to ensure smooth operation.
  • Take the vehicle for a short drive to test clutch engagement under load.

Conclusion

Upgrading to a Centerforce DFX clutch can significantly enhance your vehicle’s performance, especially for those running over 600 horsepower. Following this guide will help ensure a successful installation, allowing you to enjoy the benefits of improved power transfer and reliability on the road or track.