Table of Contents
Installing a cold air intake can significantly improve your vehicle’s performance. In this guide, we will walk you through the process of installing the AEM 21-732C cold air intake, which is designed to provide up to 18 horsepower gains. Follow these steps to enhance your engine’s efficiency and power.
Tools and Materials Needed
- AEM 21-732C Cold Air Intake Kit
- Socket Set
- Wrench Set
- Flathead Screwdriver
- Phillips Screwdriver
- Torque Wrench
- Rubber Gloves
- Safety Glasses
Preparation
Before starting the installation process, ensure that you have all the necessary tools and materials ready. It is also advisable to work in a well-ventilated area. Make sure the engine is cool and the vehicle is parked on a flat surface.
Step 1: Disconnect the Battery
To ensure safety, begin by disconnecting the negative terminal of the battery. This will prevent any electrical shorts during the installation process.
Step 2: Remove the Factory Air Intake
Locate the factory air intake system. Using the socket set, remove any bolts and screws securing the air intake to the engine. Carefully disconnect any hoses or clamps attached to the intake. Once everything is removed, take out the factory air intake system.
Step 3: Install the AEM Cold Air Intake
Take the AEM 21-732C cold air intake out of the box. Begin by attaching the intake tube to the air filter. Ensure that it is secured tightly using the provided clamps.
Next, position the intake tube in the engine bay. Align it with the throttle body and ensure it fits snugly. Use the provided hardware to secure the intake tube in place.
Step 4: Reconnect Hoses and Clamps
Reconnect any hoses or clamps that were disconnected during the removal of the factory air intake. Make sure all connections are tight to prevent any air leaks.
Step 5: Reinstall the Battery Terminal
Once everything is securely in place, reconnect the negative terminal of the battery. This will restore power to the vehicle.
Step 6: Test the Installation
Start the engine and listen for any unusual noises. The engine should run smoothly. Take the vehicle for a short drive to ensure that the cold air intake is functioning properly and that you notice an improvement in performance.
Benefits of Installing the AEM Cold Air Intake
The AEM 21-732C cold air intake offers several benefits that enhance your vehicle’s performance:
- Increased Horsepower: Gain up to 18 horsepower, allowing for better acceleration.
- Improved Engine Efficiency: Enhanced airflow leads to better fuel efficiency.
- Better Engine Sound: Experience a more aggressive engine sound that enhances the driving experience.
- High-Quality Construction: Made from durable materials designed to withstand harsh conditions.
Conclusion
Installing the AEM 21-732C cold air intake is a straightforward process that can yield significant performance gains for your vehicle. By following this step-by-step guide, you can enhance your engine’s power and efficiency with ease. Enjoy the improved driving experience that comes with your new cold air intake!