Table of Contents
Installing a cold air intake on your Ford Mustang GT can enhance its performance and improve fuel efficiency. This guide provides a detailed, step-by-step process along with photos to help you through the installation.
Tools and Materials Needed
- Cold air intake kit
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Shop towels
- Safety glasses
Preparation
Before starting the installation, ensure your Mustang GT is parked on a flat surface and the engine is cool. Gather all the tools and materials listed above.
Step 1: Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Gently lift it off and set it aside.
Step 2: Disconnect the Mass Air Flow Sensor
Locate the mass air flow (MAF) sensor on the factory intake. Carefully disconnect the electrical connector by pressing the release tab and pulling it off.
Step 3: Remove the Factory Intake
Loosen the hose clamps on both ends of the factory intake using a flathead screwdriver. Remove the intake tube from the throttle body and the air filter box.
Step 4: Install the New Cold Air Intake
Take the new cold air intake and position it where the factory intake was located. Align it with the throttle body and air filter box.
Step 5: Secure the Intake
Using the provided hardware, secure the new intake in place. Ensure that all connections are tight and that the intake is properly aligned.
Step 6: Reconnect the Mass Air Flow Sensor
Reconnect the MAF sensor by plugging the electrical connector back in. Ensure it clicks into place to avoid any connection issues.
Step 7: Reinstall the Engine Cover
Place the engine cover back on and secure it with the bolts you removed earlier. Make sure everything is tight and properly fitted.
Step 8: Final Inspection
Before starting the engine, do a final inspection of all connections and fittings. Ensure that there are no loose parts or tools left in the engine bay.
Step 9: Start the Engine
Start your Mustang GT and let it idle for a few minutes. Listen for any unusual noises and check for leaks around the intake area.
Conclusion
Congratulations! You have successfully installed a cold air intake on your Ford Mustang GT. Enjoy the improved performance and sound that comes with your new setup.