Complete Guide: Installing a Forged 13b-rew Engine with Hks Turbo Kit for Under $12,000

by

In the world of automotive performance, the Mazda 13B-REW engine is a legendary choice for enthusiasts seeking power and reliability. This guide will walk you through the process of installing a forged 13B-REW engine with an HKS turbo kit for under $12,000. We will cover everything from parts selection to installation steps, ensuring you have a comprehensive understanding of the process.

Understanding the 13B-REW Engine

The Mazda 13B-REW is a lightweight, compact rotary engine known for its high power-to-weight ratio. It features:

  • Displacement: 1.3 liters
  • Configuration: Rotary
  • Power Output: Approximately 280-300 hp (stock)
  • Potential: Easily tunable for higher performance

Parts Needed for the Installation

To successfully install a forged 13B-REW engine with an HKS turbo kit, you will need the following parts:

  • Forged 13B-REW engine
  • HKS turbo kit
  • Upgraded fuel injectors
  • Aftermarket ECU
  • Turbo manifold
  • Intercooler
  • Oil cooler
  • Exhaust system
  • Gaskets and seals
  • Miscellaneous hardware (bolts, hoses, etc.)

Preparing for Installation

Before you begin the installation, ensure you have a clean workspace and all necessary tools. Here are the steps to prepare:

  • Gather all parts and tools needed for the installation.
  • Disconnect the battery and remove the existing engine.
  • Clean the engine bay thoroughly.

Installation Steps

Follow these steps to install the forged 13B-REW engine with the HKS turbo kit:

  • Step 1: Install the forged 13B-REW engine into the engine bay.
  • Step 2: Attach the turbo manifold to the engine.
  • Step 3: Connect the HKS turbo to the manifold.
  • Step 4: Install the intercooler in the designated location.
  • Step 5: Connect the upgraded fuel injectors to the fuel rail.
  • Step 6: Install the aftermarket ECU and wire it properly.
  • Step 7: Attach the exhaust system to the turbo.
  • Step 8: Install the oil cooler and connect the necessary lines.
  • Step 9: Double-check all connections, gaskets, and seals.
  • Step 10: Reconnect the battery and perform a final inspection.

Testing the Installation

After installation, it is crucial to test the engine to ensure everything is functioning correctly:

  • Start the engine and listen for any unusual sounds.
  • Check for any leaks in the fuel and oil systems.
  • Monitor the engine temperature during idle.
  • Take the car for a short test drive to assess performance.

Maintenance Tips

To keep your forged 13B-REW engine running smoothly, consider the following maintenance tips:

  • Regularly check and change the oil.
  • Inspect the turbo system for any signs of wear or damage.
  • Keep the air filter clean for optimal airflow.
  • Monitor fuel pressure and injector performance.

Conclusion

Installing a forged 13B-REW engine with an HKS turbo kit can be a rewarding project for any automotive enthusiast. With careful planning and execution, you can achieve a powerful setup for under $12,000. Follow the steps outlined in this guide to ensure a successful installation and enjoy the thrill of driving your newly enhanced vehicle.