Table of Contents
The Genesis G70 is a remarkable vehicle that combines luxury with performance. However, for those looking to enhance their driving experience, a brake performance upgrade can be a game changer. This article will guide you through the installation tips and cost breakdown for a DIY brake performance upgrade on your Genesis G70.
Understanding Brake Performance Upgrades
Before diving into the installation process, it’s essential to understand what a brake performance upgrade entails. Upgrading your brakes can improve stopping power, reduce brake fade, and enhance overall driving dynamics. Here are some common components involved in a brake performance upgrade:
- High-performance brake pads
- Upgraded rotors
- Stainless steel brake lines
- Brake fluid upgrade
Choosing the Right Components
Selecting the right components for your brake upgrade is crucial. Here are a few tips to help you make the best choices:
- Brake Pads: Look for pads that offer a good balance between performance and noise levels.
- Rotors: Consider slotted or drilled rotors for improved heat dissipation.
- Brake Lines: Stainless steel lines provide better pedal feel and durability.
- Brake Fluid: Upgrading to a higher boiling point fluid can prevent fade during aggressive driving.
Installation Tools and Equipment
Having the right tools and equipment is essential for a successful installation. Here’s a list of what you’ll need:
- Jack and jack stands
- Socket set
- Torque wrench
- Brake cleaner
- Brake grease
- Basic hand tools
Step-by-Step Installation Guide
Follow these steps for a smooth installation process:
- Step 1: Safely lift the vehicle using a jack and secure it with jack stands.
- Step 2: Remove the wheel to access the brake components.
- Step 3: Remove the caliper by unscrewing the bolts and gently sliding it off the rotor.
- Step 4: Replace the old brake pads with the new ones, ensuring they are properly seated.
- Step 5: Remove the old rotor and replace it with the upgraded rotor.
- Step 6: Reinstall the caliper and wheel, ensuring all bolts are torqued to the manufacturer’s specifications.
- Step 7: Repeat the process for the other side of the vehicle.
- Step 8: Once all components are installed, bleed the brake system to remove any air bubbles.
Cost Breakdown
Understanding the cost associated with a brake performance upgrade is important for budgeting. Here’s a breakdown of potential costs:
- High-performance brake pads: $100 – $300
- Upgraded rotors: $150 – $400
- Stainless steel brake lines: $50 – $150
- Brake fluid: $20 – $50
- Miscellaneous supplies: $20 – $50
Overall, you can expect to spend between $340 and $900 for a complete DIY brake performance upgrade, depending on the components you choose.
Final Thoughts
Upgrading the brakes on your Genesis G70 can provide significant performance benefits. With the right components, tools, and a little patience, you can successfully complete this upgrade yourself. Remember to prioritize safety and consult a professional if you’re unsure about any step of the process. Happy upgrading!