Table of Contents
Installing a body lift on your Land Cruiser 80 Series can enhance its off-road capabilities and improve its overall stance. This DIY guide will walk you through the steps to install a 2-inch body lift for under $300, making your vehicle ready for your next adventure.
Tools and Materials Needed
- 2-inch body lift kit
- Socket set
- Wrench set
- Jack and jack stands
- Torque wrench
- Safety glasses
- Gloves
Preparation Steps
Before starting the installation, ensure you have a clean workspace and all the necessary tools and materials. Follow these preparation steps:
- Read the body lift kit instructions thoroughly.
- Gather all tools and materials in one place.
- Park the vehicle on a flat surface and engage the parking brake.
Step-by-Step Installation
1. Lift the Vehicle
Using the jack, lift the front of the vehicle and secure it with jack stands. Repeat this for the rear of the vehicle. Ensure the vehicle is stable before proceeding.
2. Remove the Body Mount Bolts
Locate the body mount bolts on the frame of your Land Cruiser. Use the socket set to remove these bolts. Keep them in a safe place as you will need them later.
3. Install the Body Lift Blocks
Place the body lift blocks between the frame and the body of the vehicle. Make sure they are positioned correctly and aligned with the existing body mount locations.
4. Reinstall the Body Mount Bolts
Reinsert the body mount bolts through the lift blocks and into the frame. Tighten them by hand first, then use a torque wrench to tighten them to the manufacturer’s specifications.
5. Repeat for All Body Mounts
Continue the process for all body mounts on the vehicle. Ensure that each bolt is tightened properly and that the body lift blocks are secure.
Post-Installation Checks
After completing the installation, perform the following checks:
- Double-check all bolts for tightness.
- Inspect the lift blocks for proper alignment.
- Ensure there are no loose parts or tools left under the vehicle.
Conclusion
Installing a 2-inch body lift on your Land Cruiser 80 Series is a manageable DIY project that can enhance your vehicle’s performance and appearance. By following this guide, you can achieve a professional-looking lift for under $300.