Table of Contents
Installing a Mishimoto intercooler on your Genesis G70 can significantly enhance performance by lowering intake temperatures, resulting in better power output and efficiency. This DIY guide will walk you through the process step-by-step.
Tools and Materials Needed
- Mishimoto intercooler kit
- Socket set
- Wrenches
- Torque wrench
- Flathead screwdriver
- Phillips screwdriver
- Ratchet straps
- Coolant (if needed)
- Shop towels
- Safety glasses
Preparation
Before starting the installation, ensure you have a clean workspace and all necessary tools and materials within reach. It’s advisable to wear safety glasses to protect your eyes during the process.
Step 1: Remove the Front Bumper
To access the intercooler, you will need to remove the front bumper of your Genesis G70. Begin by unscrewing the screws and bolts securing the bumper in place.
- Locate screws in the wheel wells and under the front lip.
- Remove any clips holding the bumper.
- Gently pull the bumper away from the vehicle.
Step 2: Disconnect the Stock Intercooler
Once the bumper is removed, locate the stock intercooler. Carefully disconnect the piping and any electrical connectors attached to it.
- Loosen the clamps on the intercooler piping.
- Remove the piping and set it aside.
- Take out the stock intercooler from its mounting brackets.
Step 3: Install the Mishimoto Intercooler
With the stock intercooler removed, it’s time to install the Mishimoto intercooler. Carefully position it in place, ensuring it aligns with the mounting points.
- Secure the intercooler using the provided mounting hardware.
- Reconnect the intercooler piping, making sure all clamps are tightened.
- Check for any leaks or loose connections.
Step 4: Reattach the Front Bumper
After ensuring that the intercooler is securely installed, you can reattach the front bumper. Align it properly and secure it with the screws and clips you removed earlier.
- Ensure all screws are tightened to avoid any rattling.
- Double-check that the bumper is aligned with the body of the car.
Step 5: Final Checks
Before taking your Genesis G70 for a drive, perform a final inspection of your work. Make sure all tools are removed from the engine bay, and check for any loose connections.
- Look for any signs of leaks around the intercooler and piping.
- Ensure that the intercooler is securely mounted and that all clamps are tight.
Conclusion
Installing a Mishimoto intercooler on your Genesis G70 is a straightforward process that can yield significant performance benefits. With cooler intake temperatures, your vehicle can operate more efficiently and effectively. Enjoy your enhanced driving experience!