Diy Guide: Installing an Rx-7spec 3000 Turbo Upgrade for 350+ Hp

by

Upgrading your RX-7 with a Spec 3000 Turbo can significantly boost its horsepower, pushing it beyond the 350 HP mark. This DIY guide will walk you through the essential steps to install the turbo upgrade and enhance your driving experience.

Tools and Materials Needed

  • RX-7Spec 3000 Turbo Kit
  • Socket set
  • Wrenches
  • Torque wrench
  • Oil and coolant
  • Intercooler piping
  • Silicone couplers
  • Clamps
  • New gaskets
  • Fuel injectors (optional)

Preparation Steps

Before starting the installation, ensure you have a clean workspace and all necessary tools and materials at hand. Follow these preparation steps:

  • Disconnect the battery to prevent any electrical shorts.
  • Drain the engine oil and coolant to avoid spills during the installation.
  • Remove any engine covers or components that obstruct access to the turbo area.

Removing the Old Turbo

To install the RX-7Spec 3000 Turbo, you’ll first need to remove the old turbo. Follow these steps:

  • Loosen the exhaust manifold bolts and remove the old turbo from the manifold.
  • Disconnect the oil feed and return lines from the old turbo.
  • Remove the intake piping connected to the turbo.
  • Carefully take out the old turbo from the engine bay.

Installing the RX-7Spec 3000 Turbo

With the old turbo removed, you can now install the RX-7Spec 3000 Turbo. Follow these steps for a successful installation:

  • Position the new RX-7Spec 3000 Turbo in place and secure it to the exhaust manifold using the new gaskets.
  • Reconnect the oil feed and return lines, ensuring they are tight and leak-free.
  • Attach the intake piping to the new turbo, using silicone couplers and clamps for a secure fit.
  • Install any additional components included in the turbo kit, such as the wastegate or blow-off valve.

Connecting the Intercooler

To maximize the performance of your new turbo, connecting an intercooler is essential. Here’s how to do it:

  • Position the intercooler in front of the radiator for optimal airflow.
  • Connect the intercooler piping from the turbo to the intercooler and then to the intake manifold.
  • Use silicone couplers and clamps to ensure all connections are tight and secure.

Final Checks and Reassembly

After installing the new turbo and intercooler, it’s time to reassemble and check everything before starting the engine:

  • Double-check all connections, ensuring there are no loose bolts or fittings.
  • Refill the engine with oil and coolant.
  • Reconnect the battery and ensure all electrical connections are secure.

Testing the Upgrade

Once everything is reassembled, it’s time to test your new RX-7Spec 3000 Turbo:

  • Start the engine and let it idle for a few minutes to ensure there are no leaks.
  • Check the oil pressure and coolant temperature to confirm everything is functioning correctly.
  • Take the car for a test drive, gradually increasing speed to assess the new power output.

Conclusion

Installing the RX-7Spec 3000 Turbo upgrade is a rewarding project that can significantly enhance your vehicle’s performance. By following this DIY guide, you can successfully boost your RX-7 to over 350 HP, providing an exhilarating driving experience.