Diy Install of the Dinan Stage 2 Power Kit on Audi Rs7: Step-by-step with Cost Analysis

by

DIY Install of the Dinan Stage 2 Power Kit on Audi RS7

The Audi RS7 is a high-performance vehicle that offers an exhilarating driving experience. One of the best ways to enhance its performance is by installing the Dinan Stage 2 Power Kit. This article provides a comprehensive step-by-step guide for DIY enthusiasts, along with a cost analysis to help you budget for the project.

What is the Dinan Stage 2 Power Kit?

The Dinan Stage 2 Power Kit is designed to significantly increase the horsepower and torque of the Audi RS7. This kit includes upgraded components that optimize engine performance, allowing for a more powerful and responsive driving experience.

Key Components of the Kit

  • High-performance ECU software
  • Upgraded intercooler
  • Enhanced air intake system
  • Performance exhaust system

Tools and Materials Needed

Before starting the installation, ensure you have the necessary tools and materials on hand:

  • Socket set
  • Torque wrench
  • Screwdrivers (flathead and Phillips)
  • Pliers
  • Ratchet extensions
  • Safety goggles
  • Gloves

Step-by-Step Installation Guide

Step 1: Preparation

Before beginning the installation, park the Audi RS7 on a flat surface and ensure the engine is cool. Disconnect the battery to prevent any electrical issues during the process.

Step 2: Remove the Engine Cover

Using the socket set, carefully remove the bolts securing the engine cover. Lift the cover off and set it aside in a safe location.

Step 3: Install the Upgraded Intercooler

Remove the existing intercooler by disconnecting the hoses and bolts. Install the new upgraded intercooler by following these steps:

  • Position the new intercooler in place.
  • Secure it with the provided bolts.
  • Reconnect the hoses, ensuring a tight fit.

Step 4: Upgrade the Air Intake System

Remove the factory air intake system and replace it with the performance air intake included in the Dinan kit. Follow these instructions:

  • Disconnect the air intake duct.
  • Remove the air filter housing.
  • Install the new air intake system and secure it properly.

Step 5: Install the Performance Exhaust System

Next, remove the stock exhaust system and replace it with the Dinan performance exhaust. This step involves:

  • Disconnect the exhaust hangers.
  • Remove the old exhaust pipes.
  • Install the new exhaust system and secure it with clamps.

Step 6: Flash the ECU

Using the provided software, flash the ECU to optimize the vehicle’s performance. Follow the instructions included with the software to ensure a successful update.

Step 7: Reconnect the Battery and Test

Reconnect the battery and start the engine. Check for any leaks or irregular sounds. Take the car for a test drive to experience the enhanced performance.

Cost Analysis

Before starting the installation, it’s essential to consider the costs involved. Here’s a breakdown of the expected expenses:

  • Dinan Stage 2 Power Kit: $4,000
  • Tools (if not already owned): $200
  • Miscellaneous supplies (hoses, clamps): $100
  • Total Estimated Cost: $4,300

Conclusion

Installing the Dinan Stage 2 Power Kit on your Audi RS7 is a rewarding project that can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can complete the installation yourself while keeping an eye on the budget. Enjoy the newfound power and performance of your Audi RS7!